Description
High Pressure Pup Joint | Integral and Hammer Union Pup Joint
SGPE supplies high pressure pup joints for oilfield pressure pumping, hydraulic fracturing, cementing, acidizing, well testing, flowback, workover, well intervention, drilling support and wellhead pressure control operations. These pressure-rated straight pipe sections connect pumps, manifolds, plug valves, check valves, swivel joints, hammer unions, treating iron and wellhead equipment in high pressure flowline systems.
A High Pressure Pup Joint does more than bridge the distance between two oilfield connections. It helps crews build a compact flowline layout, keep proper spacing between pressure control components and reduce unnecessary fittings during rig-up, pressure testing, pumping and rig-down.
Oilfield service places heavy demands on every pup joint. The product must handle high pressure, vibration, rapid pressure changes, abrasive fluids, sour service conditions and frequent make-up and break-out. Therefore, SGPE focuses on alloy steel quality, forged-end strength, bore consistency, connection accuracy, hydrostatic testing and surface protection.
The product range includes integral pup joints, NPST pup joints, butt weld pup joints, welded union pup joints and welded flange pup joints. Common working pressure ratings include 2,000 psi, 4,000 psi, 5,000 psi, 6,000 psi, 7,500 psi, 10,000 psi and 15,000 psi.
Common sizes include 1 in, 1-1/2 in, 2 in, 3 in and 4 in. Customized length, hammer union connection, flange connection, H2S service configuration and project-specific design are also available.
What Is a High Pressure Pup Joint?
A high pressure pup joint is a short straight pipe section used in oilfield high pressure flowline systems. It connects pressure pumping equipment, manifolds, valves, treating lines and wellhead equipment. Oilfield crews use pup joints when they need accurate spacing, fast installation, flexible line arrangement or a reliable transition between pressure-rated components.
In petroleum operations, pup joints often work with hammer unions, swivel joints, plug valves, check valves, high pressure articulated flowlines, treating iron, cementing manifolds, frac manifolds, test manifolds and wellhead connections. They help operators adjust the distance between equipment without changing the full flowline arrangement.
A durable oilfield pup joint can save time during wellsite installation because flowline layouts often change from one job to another. It also helps crews improve line arrangement, maintain a safer pressure path and support smoother fluid transfer around pumps, manifolds and wellhead equipment.
The uniform bore design supports better flow capacity and helps reduce pressure loss. Its smooth inner passage allows oilfield fluids to move through the line more efficiently. This feature matters in fracturing, cementing and acidizing jobs because the line may carry high-volume fluid, cement slurry, acid, sand-laden fracturing fluid or other abrasive oilfield media.
High Pressure Pup Joint Product Range
Different oilfield jobs require different pup joint structures. SGPE offers several designs for different pressure ratings, service fluids, end connections, sealing requirements and wellsite layouts. Buyers can select the right model according to working pressure, temperature, H2S condition, connection type and project standard.
Integral Pup Joint
An integral pup joint uses high quality alloy steel, forged-end construction and seamless upset design. This structure removes welds and threads from the main pressure-containing body, so the product provides strong structural integrity for severe oilfield pressure pumping service.
This design suits hydraulic fracturing, cementing, acidizing, well testing, flowback and workover operations. Detachable wing union ends allow fast make-up and break-out of temporary oilfield flowlines. Crews can install, remove and rearrange the line quickly when the wellsite layout changes.
SGPE supplies plain integral pup joints and integral pup joints with retaining shoulder. The retaining shoulder helps prevent the nut from sliding down when crews handle the pup joint vertically. This design improves handling convenience and supports safer installation in vertical, inclined or compact flowline layouts.
Common integral pup joints cover 2 in and 3 in sizes. Lengths usually range from 1 ft to 12 ft. Working pressure can reach up to 15,000 psi depending on size, connection and service condition.
NPST Pup Joint
An NPST pup joint uses high quality seamless pipe with male and female detachable hammer unions. This structure gives crews a practical solution for temporary oilfield flowline connection, especially when the job requires reliable performance, quick assembly and flexible line arrangement.
The uniform bore supports better flow capacity, while the detachable union ends help crews connect the pup joint with other flowline products in a short time. This makes NPST pup joints useful for pressure pumping, cementing, acidizing, well testing, flowback and workover service.
Common NPST pup joints are available in 2 in and 3 in sizes. Lengths usually range from 1 ft to 20 ft. Working pressure can reach up to 15,000 psi depending on the selected model, union figure number and operating condition.
Butt Weld Pup Joint
A butt weld pup joint uses high quality seamless pipe with welded male and female hammer union ends. This design provides a practical option for petroleum flowline systems where welded union construction matches the required pressure rating and project specification.
Detachable wing union ends support fast make-up and break-out. Crews can connect the pup joint with other hammer union flowline products during pressure pumping, cementing, acidizing, flowback, well testing and workover operations.
Common butt weld pup joints are available in 2 in, 3 in and 4 in sizes. Lengths usually range from 1 ft to 20 ft. Working pressure can reach up to 6,000 psi depending on size and connection.
Welded Union Pup Joint
The welded union pup joint uses welded hammer union ends and supports a wide range of pressure ratings. Available union configurations include FIG402, FIG602, FIG1002 and FIG1502.
This type works well for cementing lines, well testing lines, flowback lines, workover lines and pressure pumping support lines. It gives buyers a flexible option when the project requires a welded union structure with common oilfield hammer union connections.
Welded Flange Pup Joint
A welded flange pup joint connects with oilfield flange equipment. This design can match wellhead equipment, choke manifolds, kill manifolds, cementing manifolds, frac manifolds, plug valves and other pressure control systems that use flange connections.
Common flange sizes include 2-1/16 in, 2-9/16 in, 3-1/8 in, 3-1/16 in and 4-1/16 in. Pressure ratings can include 3,000 psi, 5,000 psi, 10,000 psi and 15,000 psi according to flange size and project requirement.
For flange-connected wellhead or pressure control equipment, SGPE can help confirm flange size, pressure class, bore size and mating equipment before production.
Key Features of SGPE High Pressure Pup Joint
SGPE designs pressure-rated pup joints for demanding oilfield service. Each product combines strength, flow performance and wellsite convenience.
The alloy steel construction provides reliable mechanical strength. Integral forged ends help the product handle high pressure, vibration and heavy-duty petroleum service. For integral type pup joints, the forged structure removes welds and threads from the main pressure body, which improves reliability in severe flowline applications.
The uniform bore supports greater flow capacity and helps reduce turbulence inside the line. This feature benefits oilfield pumping jobs that require stable flow, lower pressure loss and efficient fluid transfer.
Detachable hammer union end connections make wellsite operation faster. Crews can connect or disconnect the pup joint with wing nuts and matching union components. This feature helps reduce rig-up time and supports flexible line arrangement around pumps, manifolds and wellhead equipment.
Hydrostatic testing can be performed at 1.5 times the rated cold working pressure according to product design and project standard. This test helps verify pressure-bearing performance before shipment.
Available options include pressure seal type, non-pressure seal type, conventional integral type, H2S service integral type, welded union type and welded flange type. With these configurations, buyers can choose a suitable pup joint for standard pressure pumping jobs, sour service wells and severe wellsite flowline layouts.
Oilfield Applications
High pressure pup joints serve oil and gas wellsite operations that require short straight pipe sections in temporary or semi-fixed high pressure flowline layouts.
In hydraulic fracturing operations, pup joints connect frac pumps, discharge lines, frac manifolds, plug valves, check valves, swivel joints and treating iron. They help crews build high pressure pumping lines quickly and keep proper spacing between equipment.
In cementing service, pup joints connect cementing units, high pressure cementing manifolds, plug valves, hammer union lines and wellhead equipment. The straight pipe design supports stable cement slurry flow and helps operators arrange the line around the wellhead.
In acidizing service, pup joints connect acid pumping units, manifolds, valves and wellhead flowline equipment. The product must handle pressure, fluid velocity and chemical exposure. SGPE can help buyers select suitable material, pressure rating, connection and service configuration according to the acidizing condition.
In well testing service, pup joints connect test manifolds, choke manifolds, temporary flowlines, plug valves and wellhead pressure control equipment. They help operators build reliable flow paths during production testing, cleanup and well evaluation operations.
In flowback operations, pup joints connect flowback manifolds, choke manifolds, temporary flowlines and pressure control equipment. They support safe fluid transfer after fracturing, stimulation or well completion operations.
In workover and well intervention jobs, pup joints support kill lines, circulation lines, pressure pumping lines, temporary well control lines and service manifolds. Their short length options help crews work efficiently when the wellsite has limited space.
In drilling support operations, pup joints can connect mud pumping support lines, pressure testing lines and auxiliary high pressure flowline equipment. They also help crews build temporary pressure connections around drilling rigs and well control equipment when the service condition requires compatible pressure-rated components.
Main Technical Specifications
The following tables list common SGPE high pressure straight pipe pup joint models for preliminary oilfield selection. Final configuration should match working pressure, test pressure, service fluid, end connection, temperature, H2S condition and petroleum project standard.
Union End and Integral Pup Joint Specifications
This table covers pressure seal type, non-pressure seal type, conventional integral type and H2S service integral type pup joints. These models are commonly used in oilfield pressure pumping, fracturing, cementing, acidizing, well testing, flowback and workover flowline systems.
| Type | End Connection | Rated Working Pressure | Common Available Sizes |
|---|---|---|---|
| Pressure Seal Type | FIG402 Union | 4,000 psi / 28 MPa | 1 in, 2 in, 3 in, 4 in |
| Pressure Seal Type | FIG602 Union | 6,000 psi / 42 MPa | 1 in, 2 in, 3 in, 4 in |
| Pressure Seal Type | FIG1002 Union | 10,000 psi / 70 MPa | 1 in, 1-1/2 in, 2 in, 3 in, 4 in |
| Pressure Seal Type | FIG1502 Union | 15,000 psi / 105 MPa | 1 in, 1-1/2 in, 2 in, 3 in |
| Non-Pressure Seal Type | FIG206 Union | 2,000 psi / 14 MPa | 2 in, 3 in, 4 in |
| Non-Pressure Seal Type | FIG602 Union | 6,000 psi / 42 MPa | 2 in, 3 in, 4 in |
| Non-Pressure Seal Type | FIG1002 Union | 10,000 psi / 70 MPa | 1-1/2 in, 2 in, 3 in, 4 in |
| Non-Pressure Seal Type | FIG1502 Union | 15,000 psi / 105 MPa | 1-1/2 in, 2 in, 3 in |
| Conventional Integral Type | FIG602 Union | 6,000 psi / 42 MPa | 1-1/2 in, 2 in, 3 in |
| Conventional Integral Type | FIG1002 Union | 10,000 psi / 70 MPa | 1-1/2 in, 2 in, 3 in |
| Conventional Integral Type | FIG1502 Union | 15,000 psi / 105 MPa | 1-1/2 in, 2 in, 3 in |
| Integral Type for H2S Service | FIG602 Union | 5,000 psi / 35 MPa | 1-1/2 in, 2 in, 3 in |
| Integral Type for H2S Service | FIG1002 Union | 7,500 psi / 53 MPa | 1-1/2 in, 2 in, 3 in |
| Integral Type for H2S Service | FIG1502 Union | 10,000 psi / 70 MPa | 1-1/2 in, 2 in, 3 in |
Welded Union Pup Joint Specifications
This table covers welded union type pup joints with common oilfield hammer union connections. These models suit cementing lines, well testing lines, flowback lines, workover lines and pressure pumping support lines.
| Type | End Connection | Rated Working Pressure | Common Available Sizes |
| Welded Union Type | FIG402 Union | 4,000 psi / 28 MPa | 2 in, 3 in, 4 in |
| Welded Union Type | Metric Thread Union | 5,000 psi / 35 MPa | 2 in, 3 in, 4 in |
| Welded Union Type | FIG602 Union | 6,000 psi / 42 MPa | 2 in, 3 in, 4 in |
| Welded Union Type | FIG1002 Union | 10,000 psi / 70 MPa | 1-1/2 in, 2 in, 3 in, 4 in |
| Welded Union Type | FIG1502 Union | 15,000 psi / 105 MPa | 1-1/2 in, 2 in, 3 in |
Welded Flange Pup Joint Specifications
This table covers welded flange type pup joints for oilfield wellhead equipment, choke manifolds, kill manifolds, cementing manifolds, frac manifolds and other flange-connected pressure control systems.
| Type | End Connection | Rated Working Pressure | Common Available Sizes |
| Welded Flange Type | 2-1/16 in Flange | 3,000 / 5,000 / 10,000 / 15,000 psi | 2 in |
| Welded Flange Type | 2-9/16 in Flange | 3,000 / 5,000 / 10,000 / 15,000 psi | 2 in, 3 in |
| Welded Flange Type | 3-1/8 in Flange | 3,000 / 5,000 psi | 3 in |
| Welded Flange Type | 3-1/16 in Flange | 10,000 / 15,000 psi | 3 in |
| Welded Flange Type | 4-1/16 in Flange | 3,000 / 5,000 / 10,000 / 15,000 psi | 4 in |
Need a FIG602, FIG1002 or FIG1502 pup joint for your flowline system? Send the required size, pressure rating, length and end connection for quick model confirmation.
Popular Sizes and Lengths
Common oilfield pup joint sizes include 1 in, 1-1/2 in, 2 in, 3 in and 4 in. The 2 in and 3 in sizes are popular in hammer union flowline systems because they match many pressure pumping, fracturing and cementing layouts.
Standard lengths usually include 1 ft, 2 ft, 3 ft, 4 ft, 5 ft, 6 ft, 8 ft, 10 ft, 12 ft, 15 ft and 20 ft. Custom length can also match wellsite layout, manifold design, pump spacing or wellhead connection requirements.
A short pup joint helps crews connect equipment in a compact wellsite area. A longer pup joint helps extend a pressure line, adjust distance between manifolds or reduce the need for too many fittings. Before selection, buyers should consider pressure rating, line movement, installation space, lifting method, connection direction and maintenance access.
Hammer Union End Connections
Common oilfield hammer union end connections for pup joints include FIG206, FIG402, FIG602, FIG1002 and FIG1502. These union types cover different pressure levels, sealing structures and petroleum service requirements.
FIG602 pup joints often serve medium pressure oilfield flowline applications. FIG1002 pup joints support many high pressure pumping jobs. FIG1502 pup joints are widely used in high pressure fracturing, cementing, acidizing and other severe wellsite operations. FIG402 and FIG206 models serve lower pressure petroleum flowline systems or special connection layouts.
A correct hammer union connection matters because mismatched parts may cause leakage, connection failure or wellsite safety risk. Buyers should confirm figure number, size, pressure rating, seal type, service fluid and compatibility with existing oilfield equipment before ordering.
Integral Pup Joint vs Butt Weld Pup Joint
An integral pup joint offers higher structural strength because the end section and body form an integral forged structure. It removes welds and threads from the main pressure-containing body. This design works well for high pressure, high vibration and heavy-duty oilfield pressure pumping service.
A butt weld pup joint uses seamless pipe with welded hammer union ends. It offers a practical and economical option for many standard petroleum pressure systems. It also provides flexible size and length options. Buyers often choose butt weld pup joints for medium pressure oilfield systems, temporary wellsite flowlines and general pressure control connections.
The best choice depends on working pressure, oilfield application, safety requirement, service fluid, project standard and budget. The SGPE team can review the operating condition and recommend the suitable type.
H2S Service Pup Joint
Sour oil and gas service requires careful material selection and manufacturing control. SGPE offers integral type pup joints for H2S oilfield environments with FIG602, FIG1002 and FIG1502 union options.
The rated working pressure for H2S service models may differ from standard service models. For example, available options include FIG602 H2S service integral pup joints at 5,000 psi, FIG1002 H2S service integral pup joints at 7,500 psi and FIG1502 H2S service integral pup joints at 10,000 psi.
When buyers need pup joints for H2S or sour gas oilfield service, they should provide fluid composition, H2S content, chloride condition, temperature, pressure, applicable standard and any special material requirement. These details help confirm the suitable sour service pup joint configuration.
Quality Control and Testing
SGPE controls key production steps to help each pressure-rated pup joint meet oilfield service requirements. The process starts with material selection. High quality alloy steel and seamless pipe help ensure strength and durability.
During manufacturing, forging, machining and connection processing follow strict dimensional control. The bore must stay uniform. The end connection must match the required hammer union or flange standard. The sealing surface must remain accurate and clean.
Before delivery, the inspection process can include material verification, dimensional inspection, visual inspection, connection inspection, sealing surface inspection, marking check and pressure performance review. Pup joints can receive hydrostatic testing at 1.5 times the rated cold working pressure according to product type and project requirement.
Surface protection also matters in oilfield service. Pup joints often face transportation impact, outdoor storage, rain, mud, dust and harsh wellsite conditions. Suitable coating, anti-rust protection and export packing can be provided according to customer requirements.
How to Select the Right Pup Joint
A clear inquiry helps SGPE recommend the right high pressure pup joint faster. Buyers should provide product type, size, working pressure, test pressure, connection type, length, service fluid, temperature and quantity.
For hammer union pup joints, please confirm the union figure number, such as FIG602, FIG1002 or FIG1502. Also confirm whether the project requires pressure seal type, non-pressure seal type, integral type, NPST type or welded union type.
For flange type pup joints, please confirm flange size, pressure rating, flange standard, bore size and mating oilfield equipment. If the product will work in H2S service, please mention sour service clearly during inquiry.
For high pressure fracturing, cementing, acidizing, well testing, flowback or workover lines, please provide fluid type, maximum working pressure, flow rate, abrasive condition and any special safety requirement. With these details, the SGPE team can review the working condition and help choose a suitable model.
Need a FIG1502 Integral Pup Joint for Oilfield Service?
If you need a 2 in FIG1502 integral pup joint, 3 in hammer union pup joint, 10,000 psi straight pipe pup joint or 15,000 psi high pressure pup joint for fracturing, cementing or acidizing service, SGPE can help confirm the suitable model.
Send the required size, pressure rating, length, union figure number, service fluid and destination port. Our team will review the working condition and provide technical support for your oilfield flowline requirement.
Why Choose SGPE
SGPE supplies oilfield high pressure flowline products for drilling, completion, workover, well testing, flowback, fracturing, cementing and acidizing service. Buyers can source compatible pup joints, hammer unions, swivel joints, plug valves, check valves, flowline fittings and other pressure control components from one supplier.
The SGPE team supports both standard models and customized requirements. Whether the project needs a 2 in FIG1502 integral pup joint, a 3 in FIG1002 NPST pup joint, a 4 in FIG602 welded union pup joint or a flange type straight pipe pup joint for oilfield service, SGPE can help with model selection and quotation.
Frequently Asked Questions
1. What is a High Pressure Pup Joint?
A High Pressure Pup Joint is a short straight pipe section for oilfield high pressure flowline systems. It connects pumps, manifolds, plug valves, check valves, hammer unions, swivel joints and wellhead pressure control equipment.
Oilfield crews use a pup joint to adjust flowline length, improve equipment spacing and build a safer pressure-rated connection during rig-up, pressure testing, pumping and rig-down. In field use, buyers may also call it a flowline pup joint, hammer union pup joint, oilfield straight pipe, pressure-rated straight pipe or high pressure flowline pipe.
2. Where do oilfield crews use high pressure pup joints?
Oilfield crews use high pressure pup joints in hydraulic fracturing lines, cementing lines, acidizing lines, well testing lines, flowback lines, workover lines, kill lines, circulation lines and temporary pressure pumping lines.
In a fracturing job, a FIG1502 pup joint can connect frac pumps, frac manifolds, plug valves, check valves and treating iron. In cementing service, a hammer union pup joint can connect the cementing unit, cementing manifold and wellhead equipment. In flowback or well testing service, a pup joint helps operators build a reliable flow path between the wellhead, choke manifold and temporary flowline system.
3. What types of high pressure pup joints can SGPE supply?
SGPE can supply integral pup joints, NPST pup joints, butt weld pup joints, welded union pup joints and welded flange pup joints for oilfield flowline service. Each type suits a different pressure level, service fluid, connection style and wellsite layout.
Integral pup joints suit severe high pressure service. NPST pup joints provide a practical solution for temporary flowline connection. Butt weld pup joints offer flexible length and size options for standard oilfield pressure systems. Welded union pup joints match common hammer union connections. Welded flange pup joints connect with wellhead equipment, choke manifolds, kill manifolds, cementing manifolds and other flange-connected pressure control equipment.
4. What is an integral pup joint?
An integral pup joint uses forged-end construction and a seamless upset body. This design removes welds and threads from the main pressure-containing section, so the product offers strong structural integrity for demanding oilfield flowline service.
SGPE integral pup joints fit hydraulic fracturing, cementing, acidizing, well testing, flowback and workover applications. Detachable wing union ends help crews make up and break out the line quickly. An optional retaining shoulder helps keep the nut in position when crews handle the pup joint vertically or install it in a compact flowline layout.
5. What is the difference between an integral pup joint, NPST pup joint and butt weld pup joint?
An integral pup joint uses a forged-end body and suits higher pressure, high vibration and severe wellsite service. It works well when buyers need a strong pressure-bearing structure for fracturing, cementing or acidizing operations.
An NPST pup joint uses seamless pipe with male and female detachable hammer unions. It gives crews a reliable and convenient option for temporary oilfield flowline systems.
A butt weld pup joint uses seamless pipe with welded hammer union ends. It offers a practical choice for standard pressure pumping lines, cementing lines, workover lines and other oilfield flowline layouts where a welded union structure meets the project requirement.
6. Which hammer union connections can SGPE provide for pup joints?
SGPE can provide common oilfield hammer union connections for pup joints, including FIG206, FIG402, FIG602, FIG1002 and FIG1502. These connection types help buyers match different working pressures, seal designs and existing wellsite flowline equipment.
FIG602 pup joints often fit medium pressure oilfield flowline service. FIG1002 pup joints support many high pressure pumping operations. FIG1502 pup joints work in severe high pressure applications such as hydraulic fracturing, cementing and acidizing. Before ordering, buyers should confirm the size, figure number, pressure rating, seal type, service fluid and compatibility with current field equipment.
7. Can SGPE supply FIG1502 high pressure pup joints?
Yes. SGPE can supply FIG1502 high pressure pup joints for demanding oilfield service. Available options can include pressure seal type, non-pressure seal type, conventional integral type, H2S service integral type and welded union type.
A FIG1502 pup joint usually appears in 10,000 psi or 15,000 psi flowline systems, depending on product type, size and service condition. Oilfield crews commonly use FIG1502 integral pup joints and FIG1502 hammer union pup joints in fracturing, cementing, acidizing, pressure pumping and severe wellsite flowline applications.
8. What sizes, lengths and pressure ratings are available?
Common pup joint sizes include 1 in, 1-1/2 in, 2 in, 3 in and 4 in. The 2 in and 3 in pup joints remain popular in oilfield hammer union flowline systems because they match many pressure pumping, fracturing and cementing layouts.
Common lengths include 1 ft, 2 ft, 3 ft, 4 ft, 5 ft, 6 ft, 8 ft, 10 ft, 12 ft, 15 ft and 20 ft. Common working pressure ratings include 2,000 psi, 4,000 psi, 5,000 psi, 6,000 psi, 7,500 psi, 10,000 psi and 15,000 psi. The final rating depends on size, end connection, seal design, service fluid, temperature and project standard.
9. Can SGPE supply pup joints for H2S or sour service?
Yes. SGPE can supply integral pup joints for H2S oilfield service and sour gas flowline conditions. Sour service requires careful material selection, stable manufacturing control and clear working condition confirmation.
For an H2S service pup joint, buyers should provide H2S content, fluid composition, chloride condition, temperature, working pressure, test pressure and applicable project standard. With these details, SGPE can help confirm a suitable sour service integral pup joint, H2S service pup joint or FIG1502 H2S pup joint configuration.
10. Can SGPE supply flange type pup joints?
Yes. SGPE can supply welded flange type pup joints for oilfield pressure control systems. These pup joints connect with wellhead equipment, choke manifolds, kill manifolds, cementing manifolds, frac manifolds, valves and other flange-connected oilfield equipment.
Common flange options include 2-1/16 in, 2-9/16 in, 3-1/8 in, 3-1/16 in and 4-1/16 in. Pressure ratings can include 3,000 psi, 5,000 psi, 10,000 psi and 15,000 psi, depending on flange size and project requirement. Buyers should provide flange size, pressure class, bore size, mating equipment and service condition before ordering.
11. How does SGPE inspect and test high pressure pup joints before delivery?
SGPE checks key production steps before delivery. Common inspection items include material verification, dimensional inspection, visual inspection, connection inspection, sealing surface inspection, marking inspection and pressure testing.
When the product design or project standard requires it, hydrostatic testing can be conducted at 1.5 times the rated cold working pressure. This test helps confirm pressure-bearing performance before shipment. Surface coating, anti-rust protection and export packing can also support transportation, outdoor storage and harsh oilfield site conditions.
12. What information should buyers provide before ordering a pup joint?
To help SGPE recommend the right model faster, buyers should provide the pup joint type, size, length, working pressure, test pressure, end connection, union figure number, service fluid, temperature, H2S condition, quantity and destination port.
For hammer union pup joints, please confirm FIG602, FIG1002, FIG1502 or other required union type. For flange type pup joints, please confirm flange size, pressure rating and bore size. For fracturing, cementing, acidizing, well testing, flowback or workover service, please also share the fluid type, flow rate, abrasive condition, wellsite layout and any special field requirement.
Request a Quote from SGPE
If you need a high pressure pup joint, integral pup joint, NPST pup joint, butt weld pup joint, hammer union pup joint or straight pipe pup joint for oilfield flowline service, SGPE can help you choose the right model.
E-Mail:
info@sgpe.com
