Description
Flowline Pup Joint – API Integral Forged High Pressure Pup Joint
SGPE supplies Flowline Pup Joint products for high pressure surface flowline systems in the petroleum industry. This API Integral Forged Flowline Pup Joint 10 ft connects pump trucks, fracturing manifolds, cementing manifolds, treating iron, plug valves, check valves, swivel joints, hammer unions, wellhead equipment and other pressure control equipment at the wellsite.
A flowline pup joint is a short rigid pipe section with special end connections on both ends. Field crews use it to adjust line length, connect pressure pumping equipment, build temporary treating lines and transfer high pressure oilfield fluids. It supports hydraulic fracturing, cementing, acidizing, well testing, workover, well service and drilling support operations.
SGPE provides pressure seal type, non-pressure seal type, conventional integral type, H2S service type, welded union type and welded flange type pup joints. Common sizes include 1 in, 1-1/2 in, 2 in, 3 in and 4 in.
Common working pressure ratings range from 1,000 psi to 15,000 psi, equal to approximately 7 MPa to 105 MPa. For special projects, SGPE can also customize length, pressure rating, end connection and service configuration according to customer drawings or field requirements.
High Pressure Flowline Pup Joint for Pressure Pumping Service
A high pressure flowline pup joint works as a rigid pipe section in oilfield surface lines. It connects treating iron and pressure control components during fracturing, cementing, acidizing, well testing and workover operations. These jobs involve high pressure, vibration and repeated assembly, so every connection must match the complete surface flowline system.
In a pressure pumping layout, pup joints often work together with hammer unions, swivel joints, plug valves, check valves, elbows, tees, manifolds and high pressure hoses. SGPE provides common hammer union connection options such as FIG206, FIG402, FIG602, FIG1002 and FIG1502 to match different pressure classes and field layouts.
The 10 ft length gives many wellsite layouts a practical connection distance. It works well for manifold connection, pump truck connection and temporary pressure line arrangement. At the same time, this length remains convenient for transportation, lifting, installation and field handling. SGPE can also supply metric lengths such as 1 m, 1.5 m, 2 m, 2.5 m and 2.8 m, as well as custom lengths for special installation requirements.
Product Overview
SGPE flowline pup joints serve demanding petroleum field environments. They fit fracturing lines, cementing lines, acidizing lines, well testing lines, drilling fluid support lines and other high pressure surface piping systems.
The integral forged structure provides a strong one-piece body. This design improves pressure resistance and reduces unnecessary weak points in high pressure service. Many pressure pumping contractors choose an integral forged pup joint because it offers a compact structure, reliable connection, strong mechanical performance and long service life.
Different wells and service companies may require different service configurations. SGPE can provide pup joints for normal temperature service, low temperature service and sour gas service. For H2S environments, SGPE reviews the working condition and selects suitable material, heat treatment and inspection requirements according to the confirmed project standard.
When customers require NACE service, third-party inspection, pressure test reports, material certificates or API-related documentation, SGPE can confirm these details before production.
Product Highlights
| Item | Description |
|---|---|
| Product Name | Flowline Pup Joint |
| Main Type | API Integral Forged High Pressure Pup Joint |
| Common Length | 10 ft, 5 ft, 6 ft, 8 ft, metric lengths and customized lengths |
| Common Size | 1 in, 1-1/2 in, 2 in, 3 in, 4 in |
| Working Pressure | 1,000 psi to 15,000 psi |
| Common Connections | FIG206, FIG402, FIG602, FIG1002, FIG1502, threaded end, flange end |
| Service Options | Normal temperature, low temperature, H2S service and sour service |
| Main Applications | Fracturing, cementing, acidizing, well testing, workover and drilling support |
Key Features of SGPE Flowline Pup Joint
SGPE designs each Flowline Pup Joint for real field operation. The product supports high pressure transmission, quick installation, repeated use and stable connection performance.
The pup joint uses selected alloy steel. SGPE chooses suitable material according to working pressure, size, service fluid, temperature and customer standard. Proper material selection helps the product handle pressure pumping loads, field vibration, frequent assembly and tough wellsite conditions.
Controlled forging, machining and heat treatment improve product strength and dimensional accuracy. The forged body provides mechanical stability, while precision machining ensures accurate connection fit. This feature matters especially for hammer union pup joints, because field crews need fast assembly and reliable sealing during pressure pumping operations.
Customers can choose union ends, threaded ends, flange ends or welded connection structures. Common union options include FIG402, FIG602, FIG1002 and FIG1502. For high pressure fracturing and cementing lines, many buyers choose FIG1502 pup joints because this connection is widely used in treating iron systems.
SGPE supplies different pressure classes, including 2,000 psi, 4,000 psi, 5,000 psi, 6,000 psi, 7,500 psi, 10,000 psi and 15,000 psi. The final pressure rating should match the complete flowline system, test pressure requirement and project safety standard.
Although this page focuses on the API Integral Forged Flowline Pup Joint 10 ft, SGPE can also manufacture other lengths. Customers can request standard metric lengths, standard oilfield lengths or fully customized lengths according to manifold spacing, equipment layout and wellsite installation needs.
Available Types of Flowline Pup Joint
Pressure Seal Type Pup Joint
The pressure seal type pup joint fits high pressure flowline systems that require reliable sealing performance. SGPE supplies this type with FIG402, FIG602, FIG1002 and FIG1502 union connections. The rated working pressure usually covers 4,000 psi to 15,000 psi, depending on size and connection model.
This type suits drilling support, cementing, fracturing, acidizing, well testing and other high pressure field operations where the line needs stable pressure sealing.
Non-Pressure Seal Type Pup Joint
The non-pressure seal type pup joint can use FIG206, FIG602, FIG1002 and FIG1502 connections. Its working pressure range can cover 2,000 psi to 15,000 psi.
This type gives contractors another option for different pressure pumping layouts. SGPE can recommend the proper model according to pipe size, pressure rating, service fluid, temperature and operating condition.
Conventional Integral Type Pup Joint
The conventional integral type pup joint uses an integral forged body and union end connections. Common connection models include FIG602, FIG1002 and FIG1502. The rated working pressure generally covers 6,000 psi to 15,000 psi.
This structure combines forged strength, compact design and convenient field installation. Buyers searching for integral pup joint, forged flowline pup joint, oilfield pup joint or hammer union pup joint can use this type for demanding high pressure service.
Integral Type for H2S Service
SGPE supplies integral pup joints for H2S and sour service environments. Common connection models include FIG602, FIG1002 and FIG1502. The rated working pressure usually covers 5,000 psi to 10,000 psi, depending on design and service condition.
Sour service requires careful material selection, heat treatment and quality control. Therefore, customers should provide H2S concentration, fluid condition, working pressure, temperature and applicable standard when sending an inquiry. SGPE will review these details and recommend a suitable sour service configuration.
Welded Union Type Pup Joint
The welded union type can use FIG402, metric Tr union, FIG602, FIG1002 and FIG1502 connections. The rated working pressure can cover 4,000 psi to 15,000 psi.
This type suits surface flowline systems where the project requires welded construction and union end connection. It can connect high pressure equipment in drilling support, cementing, fracturing, acidizing and well testing operations.
Welded Flange Type Pup Joint
The welded flange type uses flange end connections such as 2-1/16 in, 2-9/16 in, 3-1/8 in, 3-1/16 in and 4-1/16 in. The rated working pressure can include 3,000 psi, 5,000 psi, 10,000 psi and 15,000 psi, depending on flange size and project requirement.
Flange end pup joints suit equipment connection points where a flange interface works better than a union connection. Operators often use them near wellhead equipment, high pressure manifolds, choke manifolds, test manifolds and fixed surface flowline systems.
Main Technical Specifications
The following tables list common SGPE high pressure flowline pup joint models for preliminary selection. Final configuration should match working pressure, test pressure, service fluid, end connection, temperature, H2S condition and project standard.
Pressure Seal and Non-Pressure Seal Flowline Pup Joint Specifications
This table covers common pressure seal and non-pressure seal type flowline pup joints with FIG union connections. These models are widely used in oilfield pressure pumping lines, fracturing flowlines, cementing lines, acidizing lines, well testing lines and workover service systems.
| Type | End Connection | Rated Working Pressure | Available Size |
|---|---|---|---|
| Pressure Seal Type | FIG402 Union | 4,000 psi / 28 MPa | 1 in, 2 in, 3 in, 4 in |
| Pressure Seal Type | FIG602 Union | 6,000 psi / 42 MPa | 1 in, 2 in, 3 in, 4 in |
| Pressure Seal Type | FIG1002 Union | 10,000 psi / 70 MPa | 1 in, 1-1/2 in, 2 in, 3 in, 4 in |
| Pressure Seal Type | FIG1502 Union | 15,000 psi / 105 MPa | 1 in, 1-1/2 in, 2 in, 3 in |
| Non-Pressure Seal Type | FIG206 Union | 2,000 psi / 14 MPa | 2 in, 3 in, 4 in |
| Non-Pressure Seal Type | FIG602 Union | 6,000 psi / 42 MPa | 2 in, 3 in, 4 in |
| Non-Pressure Seal Type | FIG1002 Union | 10,000 psi / 70 MPa | 1-1/2 in, 2 in, 3 in, 4 in |
| Non-Pressure Seal Type | FIG1502 Union | 15,000 psi / 105 MPa | 1-1/2 in, 2 in, 3 in |
Integral Forged and H2S Service Flowline Pup Joint Specifications
This table covers conventional integral type and H2S service type flowline pup joints. These models suit high pressure oilfield flowline systems that require integral forged construction, reliable connection strength, sour service configuration or H2S service compatibility.
| Type | End Connection | Rated Working Pressure | Available Size |
| Conventional Integral Type | FIG602 Union | 6,000 psi / 42 MPa | 1-1/2 in, 2 in, 3 in |
| Conventional Integral Type | FIG1002 Union | 10,000 psi / 70 MPa | 1-1/2 in, 2 in, 3 in |
| Conventional Integral Type | FIG1502 Union | 15,000 psi / 105 MPa | 1-1/2 in, 2 in, 3 in |
| Integral Type for H2S Environment | FIG602 Union | 5,000 psi / 35 MPa | 1-1/2 in, 2 in, 3 in |
| Integral Type for H2S Environment | FIG1002 Union | 7,500 psi / 53 MPa | 1-1/2 in, 2 in, 3 in |
| Integral Type for H2S Environment | FIG1502 Union | 10,000 psi / 70 MPa | 1-1/2 in, 2 in, 3 in |
Welded Union and Welded Flange Flowline Pup Joint Specifications
This table covers welded union type and welded flange type flowline pup joints. These models are suitable for high pressure surface flowline systems, wellhead equipment, test manifolds, choke manifolds, pressure control equipment and fixed oilfield flowline installations.
| Type | End Connection | Rated Working Pressure | Available Size |
| Welded Union Type | FIG402 Union | 4,000 psi / 28 MPa | 2 in, 3 in, 4 in |
| Welded Union Type | Tr Union in Metric | 5,000 psi / 35 MPa | 2 in, 3 in, 4 in |
| Welded Union Type | FIG602 Union | 6,000 psi / 42 MPa | 2 in, 3 in, 4 in |
| Welded Union Type | FIG1002 Union | 10,000 psi / 70 MPa | 1-1/2 in, 2 in, 3 in, 4 in |
| Welded Union Type | FIG1502 Union | 15,000 psi / 105 MPa | 1-1/2 in, 2 in, 3 in |
| Welded Flange Type | 2-1/16 in Flange | 3,000 / 5,000 / 10,000 / 15,000 psi | 2 in |
| Welded Flange Type | 2-9/16 in Flange | 3,000 / 5,000 / 10,000 / 15,000 psi | 2 in, 3 in |
| Welded Flange Type | 3-1/8 in Flange | 3,000 / 5,000 psi | 3 in |
| Welded Flange Type | 4-1/16 in Flange | 3,000 / 5,000 / 10,000 / 15,000 psi | 4 in |
| Welded Flange Type | 3-1/16 in Flange | 10,000 / 15,000 psi | 3 in |
Common Length Options
SGPE provides the 10 ft flowline pup joint as a common length for field installation. This length works well in pressure pumping lines, frac manifolds, cementing manifolds, well testing equipment and temporary surface flowline layouts.
| Length Type | Common Length |
| Metric Length | 1 m, 1.5 m, 2 m, 2.5 m, 2.8 m |
| Oilfield Length | 5 ft, 6 ft, 8 ft, 10 ft |
| Customized Length | Available according to drawing or site requirement |
For special projects, SGPE can also manufacture non-standard lengths. Customers can provide overall length, connection type, size, pressure rating and service environment for production confirmation.
Applications in Petroleum Field Operations
SGPE flowline pup joints help operators build safe and reliable high pressure flow paths between pumping equipment, manifolds and wellhead systems.
Fracturing Flowline
In hydraulic fracturing operations, high pressure pup joints connect pump trucks, frac manifolds, treating iron, plug valves, check valves, swivel joints and wellhead equipment. The line often faces high pressure, vibration, frequent movement and repeated assembly. Therefore, the product must provide reliable strength, accurate connection and stable sealing performance.
FIG1502 pup joints are widely used in high pressure fracturing service. SGPE can supply suitable sizes and pressure classes according to the customer’s frac line design and wellsite layout.
Cementing Line
During cementing operations, the pup joint transfers cement slurry and related fluids between cementing equipment, cementing manifolds and wellhead systems. It helps maintain a stable high pressure flow path during pumping.
SGPE can recommend suitable pressure classes and connection types for cementing trucks, cementing skids, cementing manifolds and high pressure cement lines.
Acidizing Line
In acidizing operations, the pup joint connects acidizing pumps, treating manifolds and wellhead equipment. This service requires attention to fluid condition, material compatibility, pressure rating and sealing performance.
SGPE can help customers select suitable pup joints according to acid type, working pressure, temperature, service time and project standard.
Well Testing Line
In well testing and production testing operations, high pressure straight pipes connect test manifolds, choke manifolds, flowback equipment and surface testing equipment. The pup joint helps build a stable flow path for testing service.
SGPE can supply union end or flange end pup joints for different well testing layouts. Customers can choose proper pressure classes according to well pressure and test equipment requirements.
Workover and Well Service Line
In workover and well service operations, pup joints connect high pressure pumps, manifolds and wellhead equipment. Crews use them for temporary pressure lines, circulation lines, pumping lines and service lines.
SGPE pup joints support convenient field installation and repeated use. The rugged structure helps the product withstand demanding wellsite handling conditions.
H2S and Sour Service
For sour gas fields and H2S environments, SGPE can provide integral pup joints designed for sour service. These products suit oil and gas well service conditions where sour fluid may exist.
Customers should provide H2S concentration, service fluid, working pressure, temperature, required standard and inspection requirement before order confirmation. SGPE will review these details and recommend a suitable configuration.
Advantages of SGPE High Pressure Pup Joints
SGPE focuses on practical field performance. The product design supports easy handling, quick connection and reliable service life in drilling support, fracturing, cementing, acidizing, well testing and workover operations.
The integral forged body improves strength and reduces unnecessary weak points in high pressure service. Precision-machined union or flange connections help field crews assemble the line faster. In addition, multiple pressure ratings allow users to match the pup joint with different pressure control systems.
SGPE also supports flexible production. Buyers can order standard 10 ft flowline pup joints or request special lengths. They can choose FIG602, FIG1002, FIG1502, threaded ends or flange end connections. They can also specify low temperature service, H2S service, painting, marking, inspection documents and packing requirements.
Different projects may follow different standards. Therefore, SGPE recommends confirming the complete technical requirement before production. This process helps avoid connection mismatch, improves installation efficiency and reduces procurement risk.
Material, Manufacturing and Inspection
SGPE manufactures high pressure pup joints from selected alloy steel. The production process can include forging, heat treatment, precision machining, inspection, pressure testing, marking and surface protection. Each step supports product strength, dimensional accuracy and field reliability.
For integral forged pup joints, SGPE controls the forging and heat treatment process to achieve proper mechanical performance. For connection areas, SGPE focuses on thread accuracy, sealing surface quality and union fit. For flange type pup joints, SGPE confirms flange size, pressure class, bore size and connection details according to customer requirements.
Before shipment, SGPE can provide inspection according to the confirmed order. The inspection scope may include dimensional checking, visual inspection, pressure test, material document review and marking verification. If the customer needs third-party inspection, material certificates, pressure test reports or special traceability documents, SGPE can discuss these requirements before production.
SGPE can manufacture flowline pup joints according to confirmed project standards, customer drawings and applicable petroleum field requirements. If API-related documentation, special testing or third-party inspection is required, please confirm it before order placement.
How to Select the Right Flowline Pup Joint
Choosing the right Flowline Pup Joint requires more than size and length. Buyers should confirm the complete working condition before placing an order.
First, confirm the nominal size. Common options include 1 in, 1-1/2 in, 2 in, 3 in and 4 in. The size should match the connected equipment and the complete surface flowline system.
Second, confirm the working pressure. Common ratings include 2,000 psi, 4,000 psi, 5,000 psi, 6,000 psi, 7,500 psi, 10,000 psi and 15,000 psi. The pressure class must match the full high pressure line, not only one component.
Third, confirm the end connection. SGPE can supply hammer union ends, threaded ends, flange ends and welded connection structures. Common union models include FIG206, FIG402, FIG602, FIG1002 and FIG1502.
Fourth, confirm the length. The 10 ft pup joint suits many wellsite layouts. However, SGPE can also provide shorter or longer lengths according to drawings, manifold spacing and equipment layout.
Fifth, confirm the service environment. Normal temperature service, low temperature service, acidizing service and H2S service may require different material selection, heat treatment or inspection requirements.
Finally, confirm the documents and testing requirements. If the project requires material certificates, pressure test reports, traceability documents or third-party inspection, customers should mention these details in the inquiry.
Related Oilfield Flowline Products
For a complete high pressure flowline package, customers often purchase pup joints together with hammer unions, swivel joints, plug valves, check valves, elbows, tees, manifolds and high pressure hoses. These products help build reliable pressure pumping lines for fracturing, cementing, acidizing, well testing and workover service.
SGPE can help customers match related flowline components according to working pressure, end connection, service fluid and field layout. This helps reduce connection mismatch and improves wellsite installation efficiency.
Why Choose SGPE
SGPE supplies flowline equipment, high pressure straight pipes, hammer unions, swivel joints, pup joints and related pressure control products for petroleum drilling support, cementing, fracturing, acidizing, workover and well testing applications.
SGPE understands that buyers need reliable technical support, stable product quality and fast communication. When customers send a flowline pup joint inquiry, SGPE can help review size, pressure rating, connection type, length and service condition. This reduces the risk of wrong selection and helps customers receive a product that fits the actual site layout.
SGPE can also provide customized solutions. If a buyer needs a special 10 ft pup joint, FIG1502 integral pup joint, flange end pup joint, low temperature pup joint or H2S service pup joint, SGPE can review the requirement and provide a suitable quotation.
Inquiry Information Required
To help SGPE recommend the right Flowline Pup Joint, please provide the following information when sending an inquiry.
| Required Information | Example |
| Product Name | Integral Forged Flowline Pup Joint |
| Size | 2 in, 3 in or 4 in |
| Length | 10 ft or customized length |
| Working Pressure | 10,000 psi or 15,000 psi |
| End Connection | FIG602, FIG1002, FIG1502, flange or thread |
| Service Fluid | Fracturing fluid, cement slurry, acidizing fluid, drilling fluid or field service fluid |
| Service Condition | Normal, low temperature or H2S |
| Application | Fracturing, cementing, acidizing, well testing or workover |
| Quantity | Required order quantity |
| Destination | Country, port or project site |
| Documents | Pressure test report, material certificate or third-party inspection |
With clear information, SGPE can provide faster model selection, technical confirmation and quotation.
Frequently Asked Questions About Flowline Pup Joint
1. What is a flowline pup joint?
A flowline pup joint is a short rigid pipe with special end connections on both ends. In pressure pumping service, it connects pump trucks, manifolds, treating iron, wellhead equipment, plug valves, check valves, swivel joints and hammer unions. It also helps adjust line length when the wellsite layout requires a fixed pipe section between two high pressure components.
SGPE supplies pup joints for fracturing lines, cementing lines, acidizing lines, well testing lines, workover service lines and other high pressure surface flowline systems.
2. What is an API Integral Forged Flowline Pup Joint 10 ft used for?
An API Integral Forged Flowline Pup Joint 10 ft handles high pressure fluid transmission in petroleum field operations. The 10 ft length works well in temporary treating iron layouts, pressure pumping lines, manifold connections and wellhead connection areas.
Oilfield crews commonly use this high pressure pup joint in hydraulic fracturing, cementing, acidizing, well testing, drilling support, workover and well service operations. It provides a practical connection length while keeping the line strong, compact and easy to handle at the wellsite.
3. What sizes and pressure ratings can SGPE provide?
SGPE can provide common flowline pup joint sizes such as 1 in, 1-1/2 in, 2 in, 3 in and 4 in. Common working pressure ratings include 2,000 psi, 4,000 psi, 5,000 psi, 6,000 psi, 7,500 psi, 10,000 psi and 15,000 psi.
For special projects, SGPE can also review customized size, length, pressure rating and end connection requirements. Before production, the final selection should match the complete flowline system, service fluid, temperature, H2S condition, test pressure and project standard.
4. What is the difference between an integral forged pup joint and a welded pup joint?
An integral forged pup joint uses a forged one-piece body structure. This design improves strength and reduces unnecessary weak points in high pressure service. Many buyers choose integral forged pup joints for fracturing lines, cementing lines and other demanding pressure pumping operations.
A welded pup joint uses welded connection construction. It can suit some flowline layouts where welded union ends or welded flange ends are required. The best choice depends on working pressure, connection type, application, service environment and customer standard.
5. How should I choose between FIG602, FIG1002 and FIG1502 pup joints?
Choose the hammer union model according to working pressure, connected equipment, service fluid and the pressure class of the complete flowline system.
FIG602 pup joints commonly fit medium-pressure oilfield service. FIG1002 pup joints suit higher-pressure flowline applications. FIG1502 pup joints are widely used in high pressure fracturing, cementing and treating iron systems. SGPE can help check the correct union model if you provide the required size, pressure rating, application and matching equipment details.
6. Can SGPE supply FIG1502 flowline pup joints?
Yes. SGPE can supply FIG1502 flowline pup joints for high pressure oilfield service. Available options can include pressure seal type, non-pressure seal type, conventional integral type, H2S service type and welded union type.
FIG1502 pup joints are commonly used in high pressure fracturing lines, cementing lines, acidizing lines and pressure pumping systems. Customers can request 1-1/2 in, 2 in, 3 in or other suitable sizes according to the confirmed product range and project requirement.
7. Can SGPE customize the length of a high pressure pup joint?
Yes. SGPE can provide 10 ft pup joints, standard metric lengths and customized lengths. Common metric lengths include 1 m, 1.5 m, 2 m, 2.5 m and 2.8 m. Other lengths can also be manufactured according to drawings or wellsite layout requirements.
When ordering a customized pup joint, customers should confirm the overall length, nominal size, working pressure, end connection, service condition and quantity. This helps SGPE provide a faster technical confirmation and quotation.
8. What end connections are available for SGPE pup joints?
SGPE can provide union ends, threaded ends, flange ends and welded connection structures. Common hammer union connections include FIG206, FIG402, FIG602, FIG1002 and FIG1502. Flange options can include 2-1/16 in, 2-9/16 in, 3-1/8 in, 3-1/16 in and 4-1/16 in, depending on pressure class and project requirement.
The correct end connection should match the manifold, pump truck, wellhead equipment, treating iron or pressure control equipment used in the field. If the connection standard is unclear, customers can send photos, drawings or existing equipment details for review.
9. Can SGPE provide pup joints for H2S and sour service?
Yes. SGPE can provide integral pup joints for H2S service and sour oilfield environments. These products suit oil and gas well service conditions where sour fluid may exist.
For H2S service pup joints, customers should provide H2S concentration, working pressure, service fluid, temperature, connection type and required standard. SGPE will review the working condition and recommend suitable material, heat treatment, inspection and documentation requirements before production.
10. What information should I provide for a flowline pup joint quotation?
To receive a fast and accurate quotation, customers should provide the product name, size, length, working pressure, end connection, service fluid, service temperature, H2S condition, application, quantity and destination.
For example, a clear inquiry may include: 2 in FIG1502 integral forged flowline pup joint, 10 ft length, 15,000 psi working pressure, for fracturing flowline service, with pressure test report and material certificate. With complete details, SGPE can confirm the model, technical requirements and delivery arrangement more efficiently.
11. What inspection documents can SGPE provide?
SGPE can provide inspection and quality documents according to the confirmed order requirement. Common documents may include material certificate, dimensional inspection record, pressure test report, marking confirmation and packing details.
If the project requires third-party inspection, special traceability documents, API-related documentation or additional testing, customers should confirm these requirements before order placement. Early confirmation helps SGPE arrange production, inspection and documentation properly.
12. How can I select the right flowline pup joint for my oilfield project?
Start with the working pressure, nominal size and end connection. Then confirm the length, service fluid, temperature, application and H2S condition. The pup joint should match the complete high pressure flowline system, not only one single piece of equipment.
For fracturing and cementing lines, buyers often focus on FIG1502 connection, high pressure rating and reliable field handling. For well testing, workover or manifold connection, buyers may also need flange ends, special lengths or different pressure classes. SGPE can review the full working condition and recommend a suitable flowline pup joint for the project.
Request a Quote from SGPE
If you need a Flowline Pup Joint, API Integral Forged Flowline Pup Joint 10 ft, high pressure pup joint, hammer union pup joint, FIG1502 pup joint, flowline straight pipe or rigid pipe for drilling support, fracturing, cementing, acidizing, well testing, workover or H2S service, SGPE can help you select the right model.
E-Mail:
info@sgpe.com
