Description
Casing Slips for Oilfield Drilling and Casing Running
Casing slips hold a casing string at the rig floor while crews make up connections or transfer the load to the hoisting system. They are an essential part of the casing-running equipment used on oil and gas drilling rigs.
SGPE supplies CMS Type and UC-3 Casing Slips for different casing diameters and support arrangements. These mechanical oilfield handling tools use segmented steel bodies, gripping elements and matching tapered surfaces to support the casing through the rig-floor equipment.
The two series cover different requirements:
CMS Type Casing Slips accommodate selected casing outside diameters from 4-1/2 to 30 inches (114.3–762 mm). They work with compatible rotary table insert bowls or casing bushings.
UC-3 Casing Slips accommodate selected casing outside diameters from 7 to 42 inches (177.8–1,066.8 mm). They use matching chucks and linings. SGPE publishes a rated capacity of 250 US short tons (500,000 lb) for the listed configurations.
Both series provide stationary casing support during approved casing-running operations. The correct model depends on the casing OD, suspended load, gripping components and existing rig-floor equipment.
SGPE can also review requirements for casing slip inserts, gripping dies, replacement segments and compatible spare parts. For equipment replacement, original model numbers and technical drawings help establish the required dimensions.
Our casing slip range serves drilling contractors, casing-running service companies, well-servicing operators and oilfield equipment distributors looking for complete assemblies or replacement components.
Request Pricing and Availability
Email: info@sgpe.com
WhatsApp / Tel: +86 186-1599-5239
Casing Slips Technical Specifications
CMS and UC-3 Casing Slips perform a similar function, but their structures and mating equipment differ. The following comparison helps buyers identify the correct series before reviewing individual models.
General Product Specifications
| Technical Parameter | CMS Type Casing Slips | UC-3 Casing Slips |
|---|---|---|
| Brand | SGPE | SGPE |
| Product Category | Oilfield Tubular Handling Tools | Oilfield Tubular Handling Tools |
| Casing OD Range | 4-1/2–30 in | 7–42 in |
| Metric OD Range | 114.3–762 mm | 177.8–1,066.8 mm |
| Body Construction | Multi-Segment Steel Body | Multi-Piece Steel Body |
| Material Reference | Heat-Treated Alloy Steel | Steel; Confirm Grade by Model |
| Gripping Mechanism | Mechanical Wedge-Type | Mechanical Wedge-Type |
| Gripping Components | Replaceable Gripping Elements | Replaceable Inserts |
| Support Equipment | Insert Bowl / Casing Bushing | Matching Chuck / Lining |
| Taper Requirement | Confirm by Approved Drawing | 1:3 or 1:4 |
| Published Rated Capacity | Confirm by Model | 250 US Short Tons |
| Reference Assembly Weight | 71–248 kg | Confirm by Model |
| Manufacturing Reference | Applicable API Spec 7K Requirements | Applicable API Spec 7K Requirements |
| Main Application | Rotary Table Casing Running | Casing Running and Large-Diameter Casing Support |
| Spare Parts | Gripping Elements, Segments and Hardware | Inserts, Segments and Hardware |
These ranges represent multiple configurations, not one adjustable assembly. Each casing diameter requires the correct gripping components and support equipment.
How Do Casing Slips Work?
Casing slips use a mechanical wedge principle to hold casing at the rig floor.
The slip segments fit around the casing body. Their inner gripping elements contact the pipe, while the tapered outer surfaces seat against the matching insert bowl, casing bushing, chuck or lining.
When the casing load is transferred onto the slips, the tapered interface develops inward gripping force. The gripping elements engage the casing, and the support equipment transfers the load into the rig-floor structure.
Once the hoisting system takes the load again, the slips can be released according to the manufacturer’s operating instructions.
Segmented Bodies and Gripping Elements
The segmented structure allows the assembly to surround the casing. Segment quantities and gripping arrangements vary according to the casing diameter and slip design.
CMS configurations use connected segments with replaceable gripping components. UC-3 models use a multi-piece body arrangement with matching inserts.
Certain industry designs use circular gripping buttons instead of conventional insert sets. These components have different dimensions and mounting arrangements, so buyers must identify the original slip model before ordering replacements.
Main Components of a Casing Slip Assembly
| Component | Function |
|---|---|
| Slip Body Segments | Form the main gripping structure |
| Gripping Inserts / Slip Dies | Engage the casing outside diameter |
| Circular Gripping Buttons | Provide gripping contact in compatible designs |
| Hinge Pins | Connect adjacent segments |
| Retaining Hardware | Secure the applicable gripping components |
| Handling Components | Assist with positioning and removal |
| Tapered Back Surfaces | Transfer load through the mating interface |
| Insert Bowl / Casing Bushing | Support compatible CMS configurations |
| Chuck / Lining | Support compatible UC-3 configurations |
The gripping system must suit the casing material, wall thickness, maximum suspended load and condition of the support equipment. Selecting slips by nominal pipe diameter alone is not sufficient.
CMS Type Casing Slips – 4-1/2 to 30 Inches
CMS Type Casing Slips are used for stationary casing support during conventional rotary table casing-running operations.
The CMS design uses multiple steel segments fitted with gripping elements. A matching insert bowl or casing bushing supports the tapered outer surfaces and transfers the load into the rig-floor equipment.
SGPE’s CMS range covers selected casing diameters from 4-1/2 to 30 inches.
Common purchasing requirements include 7-inch, 9-5/8-inch, 10-3/4-inch, 13-3/8-inch, 16-inch, 20-inch and 30-inch casing slips.
CMS Casing Slip Size Chart and Reference Weights
| Casing OD (in) | Casing OD (mm) | Ref. Weight (kg) | Ref. Weight (lb) | Segments | Industry Insert Bowl Reference |
|---|---|---|---|---|---|
| 4-1/2–5 | 114.3–127 | 76 | 168 | 9 | API / No. 3 |
| 5-1/2–6 | 139.7–152.4 | 71 | 157 | 9 | API / No. 3 |
| 6-5/8 | 168.3 | 89 | 196 | 12 | API / No. 3 |
| 7 | 177.8 | 83.5 | 184 | 12 | API / No. 3 |
| 7-5/8 | 193.7 | 75 | 166 | 12 | API / No. 3 |
| 8-5/8 | 219.1 | 82 | 181 | 13 | API / No. 3 |
| 9-5/8 | 244.5 | 87 | 192 | 14 | No. 2 |
| 10-3/4 | 273.1 | 95 | 209 | 15 | No. 2 |
| 11-3/4 | 298.5 | 118 | 260 | 17 | No. 1 |
| 13-3/8 | 339.7 | 117 | 258 | 18 | No. 1 |
| 16 | 406.4 | 140 | 308 | 21 | Matching Casing Bushing |
| 18-5/8 | 473.1 | 166.5 | 367 | 25 | Matching Casing Bushing |
| 20 | 508 | 174 | 383 | 26 | Matching Casing Bushing |
| 24 | 609.6 | 201 | 443 | 30 | Matching Casing Bushing |
| 26 | 660.4 | 220 | 486 | 33 | Matching Casing Bushing |
| 30 | 762 | 248 | 546 | 37 | Matching Casing Bushing |
Technical reference: Published CMS-series configurations, including the size, weight, segment and bowl data in GOSCO Energy’s CMS catalog. These values are provided for preliminary comparison and do not guarantee the final weight, dimensions, rated capacity or compatibility of an SGPE-supplied assembly. Confirm order-specific specifications against the approved technical drawing.
CMS Insert Bowl and Rotary Table Compatibility
The insert bowl supports the tapered surfaces of the CMS assembly and transfers the casing load into the rig-floor equipment.
Published CMS configurations use API / No. 3, No. 2 or No. 1 bowl references for different casing-size groups. Larger models may require dedicated casing bushings.
However, these designations are not universal compatibility guarantees. Different manufacturers may use different seating dimensions or tapered interfaces.
For replacement CMS casing slips, confirm the original insert bowl model, rotary table arrangement, tapered seating geometry and required load.
If the existing equipment has no readable identification, technical drawings and photographs can help establish the correct dimensions.
UC-3 Casing Slips – 7 to 42 Inches
UC-3 Casing Slips use a multi-piece gripping arrangement for conventional and large-diameter casing handling.
The slip bodies surround the casing, while matching inserts provide gripping contact. A designated chuck and lining support the tapered surfaces and transfer the suspended load into the rig-floor structure.
SGPE publishes UC-3 configurations for selected casing diameters from 7 to 42 inches.
The listed UC-3 series has a rated capacity of 250 US short tons (500,000 lb).
This published rating applies to the slip configurations. The complete support system must also account for the approved capacity of the chuck, lining and associated structure.
UC-3 Casing Slips Size Chart and Technical Parameters
| Casing OD (in) | Casing OD (mm) | Slip Body Reference | Segments | Inserts | Taper |
|---|---|---|---|---|---|
| 7 | 177.8 | 8-5/8 in | 10 | 10 | 1:3 |
| 7-5/8 | 193.7 | 8-5/8 in | 10 | 10 | 1:3 |
| 8-5/8 | 219.1 | 8-5/8 in | 10 | 10 | 1:3 |
| 9 | 228.6 | 10-3/4 in | 10 | 10 | 1:4 |
| 9-5/8 | 244.5 | 10-3/4 in | 10 | 10 | 1:4 |
| 10-3/4 | 273.1 | 10-3/4 in | 10 | 10 | 1:4 |
| 11-3/4 | 298.5 | 13-3/8 in | 12 | 12 | 1:4 |
| 12-3/4 | 323.9 | 13-3/8 in | 12 | 12 | 1:4 |
| 13-3/8 | 339.7 | 13-3/8 in | 12 | 12 | 1:4 |
| 16 | 406.4 | 13-3/8 in Group | 14 | 14 | 1:4 |
| 18-5/8 | 473.1 | 13-3/8 in Group | 17 | 17 | 1:4 |
| 20 | 508 | 13-3/8 in Group | 17 | 17 | 1:4 |
| 22-1/2 | 571.5 | 13-3/8 in Group | 19 | 19 | 1:4 |
| 24 | 609.6 | 13-3/8 in Group | 19 | 19 | 1:4 |
| 26 | 660.4 | 13-3/8 in Group | 21 | 21 | 1:4 |
| 30 | 762 | 13-3/8 in Group | 24 | 24 | 1:4 |
| 36 | 914.4 | 13-3/8 in Group | 28 | 28 | 1:4 |
| 42 | 1,066.8 | 13-3/8 in Group | 32 | 32 | 1:4 |
Published UC-3 Rated Capacity: 250 US Short Tons
These specifications follow SGPE’s published UC-3 product data. The slip body references identify configuration groups rather than the complete external dimensions of the finished assembly.
UC-3 Taper, Chuck and Lining Requirements
The UC-3 series uses different tapered interfaces according to the body group.
The 7-inch, 7-5/8-inch and 8-5/8-inch configurations use a 1:3 taper. Published configurations from 9 to 42 inches use a 1:4 taper.
The chuck and lining must match the specified geometry. A 1:3 configuration cannot automatically replace a 1:4 assembly.
For replacement enquiries, provide the existing chuck and lining information, casing OD, taper dimensions and maximum suspended load.
For model-specific information, visit SGPE UC-3 Casing Slip.
CMS vs. UC-3 Casing Slips: Which Model Fits Your Rig?
The main difference between CMS and UC-3 is the support arrangement.
A CMS assembly works with a compatible insert bowl or casing bushing. UC-3 uses a matching chuck and lining.
Segment counts also differ. For example, a 9-5/8-inch CMS reference assembly uses 14 segments, while the corresponding UC-3 configuration uses 10 segments and 10 inserts.
For 13-3/8-inch casing, the CMS reference has 18 segments; UC-3 uses 12 segments and 12 inserts.
These differences matter when replacing complete assemblies or ordering spare parts.
If the rig already has an insert bowl or chuck, identify that equipment first. Its mating dimensions will help determine the suitable casing slip series.
For a new casing-running package, specify the slips and support equipment together. The complete arrangement must meet the casing size, maximum planned load and operating requirements.
Common Casing Slip Sizes and Industry Model References
Oilfield buyers often identify casing slips by pipe diameter, original equipment model or part number.
A nominal size such as 9-5/8 inches describes the casing to be handled. It does not identify the complete slip assembly.
Common Casing Slip Sizes
7-inch and 9-5/8-inch casing slips are available in both CMS and UC-3 configurations. The original support equipment and gripping arrangement determine which model fits the rig.
10-3/4-inch and 13-3/8-inch casing slips commonly appear in surface and intermediate casing enquiries. Buyers should confirm the casing grade, maximum load and mating equipment.
16-inch, 20-inch and 24-inch casing slips require particular attention to support geometry and available rig-floor space.
30-inch, 36-inch and 42-inch casing slips may be needed for selected large-diameter casing programs. SGPE’s UC-3 range includes all three sizes, while its CMS range extends to 30 inches.
For every diameter, verify the approved casing-support arrangement before placing an order.
CMSXL, CMS-3, CPS, CL and 3CL Casing Slips
Replacement enquiries sometimes use established industry model names rather than CMS or UC-3.
The following references can help buyers identify the original design.
| Industry Model | Published Size Range | Technical Reference | Reference Manufacturer |
|---|---|---|---|
| CMSXL / CMS-XL | 6-5/8–30 in | 4 in/ft Diameter Taper | Keystone |
| CMS-3 | 9-5/8–30 in | 3 in/ft Diameter Taper | Keystone |
| CPS Conductor Pipe Slips | Selected 24, 26 and 30 in | Specialized Conductor Slip Design | Keystone |
| CL Casing Slips | 6-5/8–48 in | Manufacturer-Specific Tapered Design | Den-Con |
| 3CL Casing Slips | 9-5/8–36 in | Manufacturer-Specific Tapered Design | Den-Con |
These third-party specifications serve as industry references. They do not establish SGPE stock availability, rated capacity or direct interchangeability.
For example, Keystone’s published 9-5/8-inch CMSXL model A14-115-F uses 14 segments and 13 hinge pins. Its CMS-3 counterpart, A14-134-F, uses the same segment and hinge-pin counts but a different tapered support arrangement.
Conductor pipe slip models may also use specialized hinge spacers and body structures.
For an equivalent or replacement assembly, provide the original manufacturer, full model number, part number and technical drawing. SGPE can review the dimensions and possible supply options.
Applications of Casing Slips in Oil and Gas Drilling
Casing slips provide stationary support during casing running and selected well construction operations. The appropriate model depends on the casing string, drilling equipment and approved operating procedure.
Onshore Drilling and Casing Running
Land drilling rigs use casing slips while installing casing strings.
The hoisting system lifts and lowers the pipe. At the rig floor, the slips hold the string during connection work and controlled load transfers.
These operations also involve casing elevators, casing tongs, rotary tables and other casing running tools.
The selected slip assembly must match the rig’s support equipment and planned string load.
Surface, Intermediate and Production Casing
Surface casing supports the upper well structure and helps isolate designated formations. Intermediate casing supports later drilling stages, while production casing prepares the well for completion.
Different casing programs require different pipe diameters and gripping arrangements.
Common procurement requirements include 9-5/8-inch, 10-3/4-inch, 13-3/8-inch and 20-inch casing slips.
For long or heavy casing strings, engineers should assess the approved load capacity and casing-body properties instead of selecting equipment by diameter alone.
Large-Diameter Conductor Casing
Conductor and large-diameter surface casing may require specialized handling arrangements because of pipe size, connection geometry and suspended load.
SGPE’s CMS range extends to selected 30-inch configurations, while UC-3 includes sizes up to 42 inches.
However, size coverage alone does not confirm suitability for conductor installation.
The engineering review must consider the complete load path, support equipment, installation space and project requirements. Some operations may need dedicated conductor pipe slips rather than conventional casing slips.
Offshore Drilling and Well Servicing
Suitable configurations may support approved casing-running operations on offshore platforms, jack-up rigs and other drilling installations.
Offshore work introduces additional considerations, including corrosion exposure, equipment layout and inspection requirements.
Floating drilling units may also experience vessel motion and dynamic loading. Engineers must review those conditions when assessing the complete support system.
Selected well-servicing and workover operations may require temporary casing support, but conventional casing slips do not replace specialized fishing or casing recovery tools.
CRA, Chrome-Alloy and Coated Casing
Some wells use corrosion-resistant alloys, chrome-alloy casing or coated tubulars with strict surface requirements.
Conventional toothed inserts may leave marks on the casing body. The amount of marking depends on the tooth profile, load, pipe material and wall thickness.
For damage-sensitive casing, buyers should confirm the acceptable gripping contact before choosing inserts.
An alternative or reduced-marking arrangement must still meet the required holding performance.
How to Select the Right Casing Slips
A suitable assembly must match both the casing and the rig-floor support equipment.
Start with the actual casing body outside diameter at the intended gripping location. Include the casing grade, wall thickness, unit weight and maximum planned suspended load.
Next, identify the existing insert bowl, casing bushing, chuck or lining. Confirm its tapered seating dimensions and approved capacity.
The gripping inserts must also suit the casing material and contact requirements.
For replacement equipment, an original part number or technical drawing usually provides a more reliable reference than the nominal casing diameter alone.
For new projects, request a coordinated review of the slips and matching support components.
This information helps SGPE assess model compatibility, casing slip load capacity requirements and the correct supply scope.
Casing Slip Inserts, Slip Dies and Replacement Parts
Gripping inserts and slip dies contact the casing body during load transfer. Repeated use can wear the gripping surfaces and associated hardware.
SGPE supports enquiries for selected replacement casing slip inserts, complete gripping sets, body segments and compatible spare parts.
Casing Slip Spare Parts Selection Guide
| Component | Information Required |
|---|---|
| Complete CMS Casing Slips | Casing OD, Model, Load, Insert Bowl |
| Complete UC-3 Casing Slips | Casing OD, Model, Chuck and Lining |
| Gripping Inserts / Slip Dies | Original Model, Dimensions, Tooth Profile, Quantity |
| Circular Gripping Buttons | Button Size, Model, Complete Set Quantity |
| Slip Body Segments | Original Model and Segment Geometry |
| Hinge Pins / Retaining Hardware | Part Number or Technical Drawing |
| Insert Bowls / Casing Bushings | Taper, Seating Dimensions, Equipment Model |
| Chucks / Linings | UC-3 Configuration and Mating Dimensions |
How to Identify Replacement Casing Slip Inserts
When the original part number is available, include it in your enquiry.
Otherwise, provide photographs of the complete assembly, insert pockets and existing gripping components. Measurements of the backing shape, tooth profile and retaining features help identify the correct part.
For example, a published 9-5/8-inch CMSXL gripping button set contains 168 circular buttons. SGPE’s 9-5/8-inch UC-3 reference uses 10 inserts.
These belong to different gripping systems and are not interchangeable without a model-specific assessment.
For related products, visit SGPE Tong Dies and Slip Inserts.
API Spec 7K, Quality Control and Inspection
API Spec 7K covers drilling and well-servicing equipment, including rotary slips and slip bowls.
SGPE references applicable API Spec 7K manufacturing requirements in its CMS and UC-3 product literature.
Buyers sourcing API 7K casing slips should confirm the actual compliance, inspection and certification scope for the selected model.
Quality Documents and Inspection Requirements
| Quality Item | Information to Confirm |
|---|---|
| Material Specification | Approved Material Grade |
| Material Traceability | Applicable Material Records |
| Heat Treatment | Required Process and Records |
| Dimensional Inspection | Approved Drawing and Tolerances |
| Visual Inspection | Applicable Acceptance Requirements |
| Gripping Components | Dimensions and Condition |
| Product Identification | Model, Size and Marking |
| Certificate of Conformity | Availability for the Selected Order |
| Third-Party Inspection | Agreed Scope |
| Load Test Documentation | Applicable Procedure and Test Records |
Manufacturing according to API Spec 7K does not automatically establish API Monogram licensing or independent third-party certification.
If your project requires particular API markings, material certificates, inspection reports or load test records, include those requirements in the RFQ.
Inspection and Maintenance
Before operation, qualified personnel should inspect the slip bodies, gripping inserts, hinge pins, retaining hardware and tapered support surfaces.
The inspection should identify cracks, deformation, excessive wear, corrosion or other damage that may affect serviceability.
The insert bowl, casing bushing, chuck or lining also requires inspection.
Crews must follow the manufacturer’s approved operating procedure and use the complete system within its rated limits.
After use, clean the equipment and protect it from impact and corrosion. Remove damaged or unserviceable components until qualified personnel complete the required assessment.
Why Choose SGPE as Your Casing Slips Supplier?
SGPE supplies CMS Type and UC-3 Casing Slips for drilling contractors, casing-running service companies, well-servicing operators and international oilfield equipment distributors.
Customers can enquire about complete assemblies, replacement gripping elements and selected spare parts.
For existing rigs, SGPE can review original equipment information, drawings and photographs to identify the required mating dimensions.
For new casing-running projects, buyers can discuss the slip model, casing program, rig-floor arrangement and inspection requirements together.
SGPE also offers related tubular handling equipment, including casing elevators, casing spiders, insert bowls and drill pipe slips.
For international orders, customers can specify export packing, inspection documents and delivery requirements as part of the quotation.
Casing Slips Price and Request for Quotation
Casing slip prices depend on the model, casing diameter, gripping components, order quantity and supply scope.
A complete CMS assembly, a UC-3 slip set and a replacement insert package may involve different components and inspection requirements.
SGPE prepares project-specific quotations based on the selected configuration.
Casing Slips RFQ Checklist
| RFQ Item | Information to Provide |
|---|---|
| Product Model | CMS / UC-3 / Existing Model |
| Casing Outside Diameter | Inches or Millimeters |
| Casing Grade | Applicable Grade |
| Wall Thickness / Unit Weight | If Available |
| Maximum Suspended Load | Required Load |
| Support Equipment | Insert Bowl / Bushing / Chuck / Lining |
| Taper and Seating Dimensions | Drawing or Equipment Reference |
| Rig Type | Land / Offshore / Workover |
| Supply Scope | Complete Assembly / Inserts / Spare Parts |
| Quantity | Sets or Pieces |
| Inspection Documents | Required Records and Certification Scope |
| Delivery Destination | Country or Port |
| Replacement Reference | Original Part Number, Drawing or Photographs |
For a preliminary quotation, provide the casing OD, preferred model, maximum suspended load and quantity.
For replacement components, original part numbers or technical drawings can help establish compatibility before purchase.
Frequently Asked Questions About Casing Slips
1. What Are Casing Slips Used for in Oil and Gas Drilling?
Casing slips are oilfield tubular handling tools used to grip and temporarily support casing strings at the rig floor during drilling and casing-running operations. They hold the casing stationary while crews make up threaded connections or transfer the suspended load between the slips and the hoisting system.
These mechanical tools use segmented steel bodies, gripping elements and tapered support surfaces to transfer the casing load into the supporting rig-floor structure. Unlike casing elevators, which lift and lower tubular strings, rotary table casing slips provide stationary support during approved handling procedures.
Casing slips are commonly used during surface casing, intermediate casing and production casing installation on land drilling rigs. Suitable configurations may also support selected offshore casing-running operations, provided that the equipment matches the casing specifications, required load and existing rig-floor arrangement.
2. What Is the Difference Between CMS Type and UC-3 Casing Slips?
CMS Type and UC-3 Casing Slips perform the same basic function, but they use different body structures and support equipment. CMS Type Casing Slips accommodate selected casing outside diameters from 4-1/2 to 30 inches and work with compatible rotary table insert bowls or casing bushings. UC-3 Casing Slips cover selected diameters from 7 to 42 inches and use matching chucks and linings.
SGPE publishes a rated capacity of 250 US short tons for its listed UC-3 configurations, while the rated capacity of CMS models requires confirmation for the specific assembly.
For example, a drilling contractor replacing 9-5/8-inch casing slips must identify whether the existing rig uses a CMS-compatible insert bowl or a UC-3 chuck and lining arrangement. Although both series include this casing size, their segment configurations and supporting interfaces differ.
The correct choice depends on the casing OD, maximum suspended load, gripping components and approved rig-floor support system.
3. What Casing Slip Sizes Are Available for 7-Inch, 9-5/8-Inch and 13-3/8-Inch Casing?
SGPE offers CMS Type and UC-3 Casing Slips for several commonly requested casing diameters, including 7-inch, 9-5/8-inch and 13-3/8-inch sizes. The CMS reference range covers selected casing outside diameters from 4-1/2 to 30 inches, while the published UC-3 range extends from 7 to 42 inches.
Other available reference sizes include 8-5/8-inch, 10-3/4-inch, 16-inch, 20-inch, 24-inch and 30-inch casing slips. The UC-3 series also includes selected 36-inch and 42-inch configurations for large-diameter casing applications.
These sizes may be relevant to surface, intermediate, production and selected conductor casing programs. However, the nominal pipe diameter does not identify the complete gripping assembly.
When reviewing a casing slip size chart, buyers should confirm the actual casing body OD, pipe grade, wall thickness, expected suspended load and matching insert bowl or chuck arrangement before selecting a model.
4. What Is the Rated Load Capacity of UC-3 Casing Slips?
SGPE publishes a rated load capacity of 250 US short tons (500,000 lb) for its listed UC-3 Casing Slips configurations. This rating refers to US short tons rather than metric tonnes and should be interpreted according to the approved product specifications and operating conditions.
The published casing slip load capacity does not automatically establish the capacity of the complete rig-floor support system. The matching chuck, lining and supporting structure must also meet the required load rating.
For example, a deep-well casing-running operation may involve a long casing string with substantial suspended weight. Engineers must review the maximum planned string load, casing properties and load-transfer arrangement before selecting the slips.
CMS Type Casing Slips have model-specific load requirements, so customers should request the approved rated capacity for the selected CMS configuration rather than assume it matches the UC-3 rating.
5. How Do I Select the Correct Casing Slip Insert Bowl or Rotary Table Bushing?
Selecting the correct casing slip insert bowl requires matching the slip assembly to the existing rotary table support equipment. The casing outside diameter, original slip model, tapered seating geometry and maximum planned load all influence compatibility.
Published CMS reference configurations use API / No. 3, No. 2 and No. 1 insert bowl designations for different casing-size groups. For example, one published industry CMS chart identifies a No. 3 reference for 7-inch casing slips, a No. 2 reference for 9-5/8-inch casing slips and a No. 1 reference for 13-3/8-inch casing slips.
However, these are industry references rather than universal interchangeability guarantees. Different manufacturers may use different tapered interfaces and seating dimensions, even when their equipment carries the same nominal bowl designation.
For replacement projects, customers should provide the existing bowl model, original equipment drawings or clear photographs. SGPE can review these details to help identify the required CMS casing slip and support-equipment configuration.
6. Are CMSXL, CMS-3, CPS, CL and 3CL Casing Slips Interchangeable?
CMSXL, CMS-3, CPS, CL and 3CL are established industry casing slip model families, but they are not automatically interchangeable. Their tapered interfaces, segment arrangements, gripping components and supporting equipment may differ.
For example, certain Keystone CMSXL configurations use a 4-inch-per-foot diameter taper, while its CMS-3 configurations use a 3-inch-per-foot diameter taper. Although both designs may accommodate the same nominal casing diameter, their mating support surfaces are different.
CPS Conductor Pipe Slips may use specialized segment and hinge-spacer arrangements for large-diameter conductor casing operations. CL and 3CL designs also have manufacturer-specific dimensions and support requirements.
For customers seeking replacement CMSXL casing slips, CMS-3 assemblies or compatible casing slip spare parts, the original manufacturer, complete model number and technical drawing provide the most reliable starting point. SGPE can review these references to assess potential supply options without assuming direct compatibility.
7. What Is the Difference Between Casing Slips, Casing Spiders and Casing Elevators?
Casing slips, casing spiders and casing elevators are used in oilfield tubular handling, but each performs a different function during casing-running operations.
Casing slips grip and temporarily support the casing string in a compatible rotary table insert bowl, casing bushing or other approved support arrangement. They remain stationary while the crew handles connections or transfers the string load.
Casing spiders provide a dedicated gripping and support assembly around the rig-floor well center. Their structural design and operating arrangement depend on the specific spider model.
Casing elevators connect to the hoisting system and are used to lift, lower or position casing joints and strings. During a typical casing-running sequence, the elevator moves the casing, while the stationary support equipment holds the string when the operating procedure requires it.
Drilling contractors must select each tool according to its intended load path, rated capacity and rig-floor compatibility.
8. Can SGPE Supply Replacement Casing Slip Inserts, Gripping Buttons and Spare Parts?
SGPE supports enquiries for selected CMS Type and UC-3 Casing Slips replacement components, including gripping inserts, slip dies, body segments, hinge pins and related hardware. These parts are used when maintaining or repairing compatible casing-handling equipment.
Different casing slip designs use different gripping arrangements. Some CMSXL-style assemblies use circular gripping buttons distributed across several segments, while UC-3 configurations use matching inserts. As a result, casing slip inserts and gripping buttons cannot be selected solely by nominal casing diameter.
For example, the published 9-5/8-inch UC-3 configuration uses 10 inserts, whereas certain 9-5/8-inch CMSXL designs use a substantially different gripping-button arrangement.
When sourcing oilfield casing slip replacement parts, customers should provide the original equipment model, part number, insert dimensions, gripping profile and required quantity. Photographs of the existing assembly and insert pockets can help SGPE review replacement requirements, particularly when the original part number is unavailable.
9. Can Casing Slips Handle CRA, Chrome-Alloy or Coated Casing Without Surface Damage?
Conventional casing slips use gripping elements that apply localized contact pressure to the casing body. Toothed inserts may leave surface marks during casing-running operations, especially when substantial suspended loads are involved.
This is an important consideration for corrosion-resistant alloy (CRA), chrome-alloy, coated and other damage-sensitive casing. The extent of marking depends on the gripping profile, applied load, pipe material, wall thickness and surface condition.
For example, a production casing program involving premium corrosion-resistant tubulars may have stricter surface-contact requirements than a conventional carbon-steel casing installation. The operator should therefore review the permitted gripping area and acceptable marking limits before selecting the handling equipment.
Alternative or reduced-marking gripping arrangements may require additional engineering assessment. Any proposed solution must still provide the required holding performance and meet the applicable operating limits. Conventional toothed slips should not be assumed to provide damage-free gripping.
10. Can SGPE Casing Slips Be Used for Offshore Drilling or Large-Diameter Conductor Casing?
Selected SGPE Casing Slips configurations may be suitable for approved offshore drilling and large-diameter casing-running operations when the complete support arrangement meets the project requirements.
The published CMS range includes selected casing diameters up to 30 inches, while UC-3 configurations extend to 42 inches. These sizes may be relevant to certain surface casing and conductor casing programs on suitable drilling installations.
However, large-diameter casing support requires more than matching the nominal pipe size. Engineers must consider the casing dimensions, suspended load, connection geometry, mating support equipment and available rig-floor space.
Offshore operations may introduce additional requirements related to corrosion exposure, inspection and equipment arrangement. On floating drilling units, vessel motion and dynamic loading must also be considered.
Some conductor casing projects require dedicated conductor pipe slips or other specialized handling equipment. The selected CMS or UC-3 assembly should therefore undergo a project-specific compatibility review before use.
11. Do SGPE Casing Slips Meet API Spec 7K, and What Quality Documents Are Available?
SGPE references applicable API Spec 7K manufacturing requirements in its CMS Type and UC-3 Casing Slips product literature. API Spec 7K addresses drilling and well-servicing equipment, including relevant rotary slip and slip bowl requirements.
For customers sourcing API 7K casing slips, the actual compliance and documentation requirements should be confirmed for the selected model and purchase order. Depending on the agreed supply scope, buyers may request information covering material specifications, traceability, heat treatment, dimensional inspection, product identification and applicable testing.
Oilfield procurement projects may also require a Certificate of Conformity, third-party inspection or specific load test documentation. The availability and scope of these records must be established before the order is confirmed.
Manufacturing according to applicable API Spec 7K requirements does not automatically establish API Monogram licensing or independent third-party certification. Customers should specify their mandatory quality and inspection requirements so SGPE can confirm what can be supplied.
12. How Much Do Casing Slips Cost, and How Can I Request a Quotation from SGPE?
Casing slip prices vary according to the selected model, casing outside diameter, gripping configuration, order quantity and required supply scope. A complete CMS casing slip assembly, a UC-3 casing slip set and a replacement insert package may have different manufacturing, component and inspection requirements.
For an accurate quotation, customers should provide the actual casing body OD, preferred model, maximum planned suspended load, existing insert bowl or chuck details and required quantity.
When purchasing replacement casing slip inserts or spare parts for an existing drilling rig, the original manufacturer, part number and technical drawing can help determine compatibility. Buyers may also specify required inspection documents, export packing, destination port and delivery requirements.
SGPE supports enquiries from drilling contractors, casing-running service companies and international oilfield equipment distributors seeking complete casing slips or compatible replacement components.
Related Oilfield Tubular Handling Equipment
Casing slips work alongside other rig-floor tools during drilling and casing installation.
For model-specific information, visit SGPE UC-3 Casing Slip. Customers requiring matching support equipment can explore Casing Spiders and Insert Bowls.
During casing running, Casing Elevators lift and lower casing joints or strings.
For drill-string handling, SGPE supplies Drill Pipe Slips. For replacement gripping components, see Tong Dies and Slip Inserts.
Request a Casing Slips Quote from SGPE
Looking for reliable casing slips for a new drilling project or replacement parts for an existing rig? SGPE supplies CMS Type and UC-3 Casing Slips, gripping inserts, slip body segments, and selected spare parts for oilfield casing-running equipment.
Choosing the right casing slips involves more than matching the pipe diameter. The assembly must suit the casing outside diameter, suspended load, and existing rig-floor support equipment. Whether your project involves surface casing installation, production casing running, offshore drilling, or large-diameter casing operations, SGPE can help review your technical requirements and identify suitable supply options.
To request a quotation, please provide the casing OD, preferred model, maximum suspended load, required quantity, and delivery destination. For replacement equipment, include the existing insert bowl or chuck model, original part number, technical drawings, or photographs. You can also specify any inspection, certification, or documentation requirements.
SGPE – Oilfield Casing Slips and Tubular Handling Equipment Supplier
Email: info@sgpe.com
WhatsApp / Tel: +86 186-1599-5239




