Description

Drill Pipe Wiper for Oilfield Drilling Rigs, Offshore and Workover Applications

SGPE manufactures Drill Pipe Wipers for removing drilling mud, mud cake, cuttings and excess fluid from the outside surface of drill pipe during tripping operations.

The rubber wiper normally sits around the drill string near the rotary table or master bushing. As crews pull the pipe out of the hole, its flexible center opening stays in contact with the pipe OD and strips away drilling fluid before the pipe reaches the working floor.

This simple wiping action helps reduce mud carryover, limit fluid spillage and keep the drill string cleaner during handling, racking and visual inspection.

SGPE supplies Solid Pipe Wipers, Flat Solid Pipe Wipers, Low Profile Pipe Wipers, Dual Solid Pipe Wipers and Dual Split Pipe Wipers for land drilling rigs, offshore drilling units, workover rigs and rig maintenance programs.

Available materials include Natural Rubber and Nitrile Rubber (NBR). Compound selection depends on the drilling-fluid system, including water-based mud (WBM), oil-based mud (OBM) and synthetic-based mud (SBM), together with hydrocarbon exposure, abrasion, operating temperature and actual wellsite conditions.

For new projects or replacement requirements, customers can provide the drill pipe OD, maximum tool joint OD, wiper OD, center bore, overall thickness, master bushing dimensions, drilling-fluid information, drawing, photographs or an existing sample. These details allow SGPE to confirm the required configuration before preparing a technical and commercial quotation.

---

Product Short Description

SGPE supplies Oilfield Drill Pipe Wipers for land drilling, offshore drilling and workover operations. Available configurations include solid, flat, low-profile, dual solid and dual split designs in Natural Rubber and NBR.

The flexible rubber section wipes drilling mud and loose debris from the drill string as crews pull pipe through the rotary table. Correct selection depends on the drill pipe OD, tool joint OD, master bushing, available installation space and mud system.

Custom sizes and aftermarket Replacement Drill Pipe Wipers can be manufactured from drawings, measurements, photographs or physical samples. SGPE also supports project orders, bulk supply and consolidated drilling-rig spare-parts procurement.

---

What Is a Drill Pipe Wiper?

A Drill Pipe Wiper, also known as an Oilfield Pipe Wiper, Rubber Pipe Wiper, Drill String Wiper, Drilling Rig Pipe Wiper, Rig Floor Pipe Wiper or Rotary Table Pipe Wiper, is a flexible rubber component used to clean the external surface of drill pipe.

Mud and formation debris often remain on the drill string during a trip out of the hole. Without an effective wiping element, the moving pipe can carry drilling fluid and solids upward toward the rotary table and working floor.

The flexible center opening surrounds the pipe and maintains wiping contact as the string moves upward. It strips away drilling mud, mud cake and loose debris before crews handle or rack the pipe.

A properly selected wiper helps improve rig-floor housekeeping, reduce unnecessary fluid carryover and provide a cleaner external pipe surface for handling and visual inspection.

The product does not contain well pressure. It serves as a rig-floor cleaning and mud-control accessory, not as a well-control barrier.

Because drilling rigs use different combinations of drill pipe, tool joints, master bushings and rotary tables, buyers should select the wiper from the complete installation rather than from nominal drill pipe size alone.

---

Drill Pipe Wiper Technical Specifications

Drill Pipe Wiper Design and Dimensional Specifications

The following specifications cover the main product configuration, installation area, dimensions and compatibility requirements. Final dimensions should follow the approved drawing or project specification.

---

Drill Pipe Wiper Materials, Service and Quality Requirements

Material selection depends on the drilling-fluid system, abrasion level, hydrocarbon exposure and operating environment. Final rubber properties, inspection and documentation requirements follow the approved technical data sheet or purchase specification.

---

Drill Pipe Wiper Types

Pipe wipers can differ in both wiping profile and body construction. Single and dual describe the wiping sections, while solid and split describe how the rubber body is constructed and installed.

Solid Drill Pipe Wiper

A Solid Drill Pipe Wiper uses a one-piece molded rubber body. It suits installations where crews can place the wiper over an accessible pipe end.

Its straightforward construction works well for routine drilling and tripping. Depending on available clearance, the design may use a standard, flat or low-profile body.

Before manufacturing, the pipe OD, maximum tool joint OD, master bushing and installation space should all be checked together.

Flat Solid and Low Profile Pipe Wipers

A Flat Solid Pipe Wiper uses a thinner rubber body and suits rigs with limited vertical clearance around the rotary table or master bushing.

A Low Profile Pipe Wiper provides an even more compact installation. It can help where pipe-handling equipment or nearby rig-floor components restrict available space.

Common industry references include flat wipers with 9, 12, 14, 17 and 19 in body ODs, while selected low-profile designs commonly appear in 9 and 14 in configurations.

The final geometry should always match the actual rig arrangement.

Dual Solid Pipe Wiper

A Dual Solid Pipe Wiper combines a one-piece body with two wiping sections.

The additional wiping area can improve mud removal during frequent trips or when more drilling fluid remains on the pipe surface.

The center opening must still maintain effective wiping contact while allowing the larger tool joint to pass without excessive interference.

Dual Split Drill Pipe Wiper

A Dual Split Drill Pipe Wiper, also called a Split Dual Pipe Wiper, uses two wiping sections in a split rubber body.

Crews can install it around an existing drill string without access to the pipe end. This makes the design especially practical for offshore rig maintenance, workover operations, active-rig replacement and refurbishment projects.

Common industry Dual Split body sizes include 14, 17, 19, 22 and 26 inches.

Selected configurations also use a steel or spring-steel reinforcing ring inside the molded body. The reinforcement helps maintain the required shape and provides support around the master bushing.

For replacement work, an existing sample, dimensional drawing or clear field measurements usually provide a practical starting point for technical matching.

---

Common Drill Pipe Wiper Sizes

Size terminology can cause confusion because some buyers refer to the drill pipe size, while others refer to the outside diameter of the wiper body.

Common bore or center cut-out references include 2-3/8, 2-7/8, 3-1/2, 4, 4-1/2 and 5 in.

These figures are industry reference sizes only. They do not mean that every bore can be combined with every body OD or wiping profile.

For example, a 22 Inch Dual Split Drill Pipe Wiper for 5 Inch Drill Pipe describes a 22-inch wiper body with a center opening selected according to the drill pipe, maximum tool joint OD and master bushing.

---

5 Inch Drill Pipe Wiper

A 5 Inch Drill Pipe Wiper is a common size-specific requirement for drilling-rig spare-parts procurement.

However, “5 inch” normally refers to the nominal drill pipe or center-opening requirement. It does not define the complete product.

The buyer should also confirm the maximum tool joint OD, required wiper OD, center bore, overall thickness, master bushing opening, rotary table arrangement, wiping profile and rubber compound.

Depending on the rig, SGPE can review 5 Inch Solid Pipe Wipers, Flat Pipe Wipers, Dual Solid Pipe Wipers and Dual Split Pipe Wipers, including NBR configurations for oil-based mud.

For a 5 Inch Drill Pipe Wiper price or factory quotation, send the complete dimensions, quantity and delivery destination.

---

Rubber Materials and Drilling Fluid Compatibility

Rubber compound selection affects flexibility, wear resistance, service life and compatibility with the drilling-fluid system.

Natural Rubber Drill Pipe Wiper

A Natural Rubber Drill Pipe Wiper offers good elasticity and mechanical resilience for many conventional drilling applications.

Natural rubber often suits water-based mud service where repeated wiping and abrasion create the main wear conditions.

Actual mud chemistry and operating temperature still matter, so final compound selection should reflect the real drilling environment.

NBR Drill Pipe Wiper for Oil-Based Mud

A Nitrile Rubber Drill Pipe Wiper, or NBR Pipe Wiper, provides better resistance to petroleum oils and hydrocarbons.

NBR is commonly considered for oil-based mud, hydrocarbon-rich drilling fluids, offshore drilling and selected workover applications with oil exposure.

For an Oil Resistant Drill Pipe Wiper, NBR Drill Pipe Wiper or OBM Pipe Wiper, provide the actual mud or fluid information so the compound can be reviewed against the intended service.

Drill Pipe Wiper for WBM

A wiper used with water-based mud needs good flexibility and abrasion resistance.

WBM can contain barite, salts, polymers and drilled solids. Both mechanical wear and fluid chemistry therefore influence rubber selection.

Natural rubber can provide a practical option for many conventional WBM applications when its formulation matches the actual operating conditions.

Drill Pipe Wiper for OBM

An OBM Drill Pipe Wiper experiences greater petroleum and hydrocarbon exposure.

NBR often provides a suitable material direction. Related purchasing searches include NBR Drill Pipe Wiper for Oil Based Mud, Oil Resistant Drill Pipe Wiper and OBM Rubber Pipe Wiper.

The base oil, additives and service temperature should be reviewed before the final material is confirmed.

Drill Pipe Wiper for SBM

Synthetic-based mud also requires compatible elastomer properties.

For offshore drilling programs using SBM, the synthetic base fluid, additive package and operating temperature should form part of the compound review.

Correct material selection helps reduce premature swelling, softening, hardening, cracking and excessive wear.

---

Typical Industry Rubber Property Reference — Non-Contractual

Rubber properties vary according to compound formulation. Final values depend on the approved material specification for each project.

These figures are industry references only. They do not represent guaranteed SGPE product values unless they appear in the approved project data sheet or customer-approved specification.

---

How Does a Drill Pipe Wiper Work?

During a trip out of the hole, the rig hoisting system pulls the drill string upward through the rotary table.

The wiper remains near the master bushing while its flexible center opening contacts the external pipe surface.

As the string moves upward, the rubber wiping edge strips away drilling mud, mud cake, cuttings, oil, water and other loose material.

The removed fluid falls back toward the collection area instead of traveling upward with the pipe. This reduces mud carried onto the working floor and gives crews a cleaner drill string to handle.

---

Drill Pipe Wiper Applications

Land Drilling Rig Applications

A Land Rig Drill Pipe Wiper removes mud while crews trip the drill string out of the well.

Typical operations include bit trips, BHA changes, mud motor service, MWD/LWD maintenance, fishing preparation, wellbore conditioning and drill-string inspection.

A correctly sized wiper helps reduce drilling fluid carried onto the rig floor during these operations.

Offshore Drill Pipe Wiper

An Offshore Drill Pipe Wiper performs the same core wiping function, but offshore rigs often provide less installation space around the rotary table.

Jack-up rigs, platform drilling rigs and offshore maintenance projects may therefore favor flat, low-profile or Dual Split Pipe Wipers.

For replacement work, existing wiper dimensions, rig layout and mud information normally provide a practical basis for identifying the correct configuration.

Workover Pipe Wiper

A Workover Pipe Wiper can remove mud, oil and well fluid from suitable tubulars during pulling operations.

Split or wrap-around configurations often suit workover service because crews can install them around an existing string without requiring access to the pipe end.

Directional and Horizontal Drilling

Directional and horizontal wells can require repeated trips for BHA changes, MWD/LWD service, mud motor or RSS work, bit changes, fishing operations and wellbore conditioning.

During each trip, the wiper helps reduce drilling fluid carried upward with the drill string.

---

How to Select the Correct Drill Pipe Wiper

Nominal drill pipe size alone is not enough to determine the correct wiper.

For a new installation, start with the drill pipe OD and maximum tool joint OD.

For a replacement, existing wiper dimensions and clear photographs usually provide the fastest route to accurate identification.

---

How to Measure a Replacement Drill Pipe Wiper

When the original part number is missing or unreadable, the existing wiper can provide most of the information needed for replacement.

For better identification, send photographs of the top, bottom, side and center opening.

A simple dimensional sketch showing the outside diameter, center bore and overall thickness can further improve replacement accuracy.

---

Aftermarket and Replacement Drill Pipe Wipers

SGPE supplies compatible aftermarket and Replacement Drill Pipe Wipers for active rigs, legacy equipment and refurbishment projects.

An original part number is useful but not essential. Technical matching can also start from an existing sample, drawing, molded identification, photographs or field measurements.

The most useful replacement data includes the body OD, center bore, thickness, wiping profile, drill pipe OD, maximum tool joint OD, master bushing dimensions, reinforcement and rubber material.

This approach helps drilling contractors source a compatible replacement when the original spare part is obsolete, unavailable or difficult to identify.

For multi-rig fleets, several sizes can also be combined within one drilling-rig spare-parts order, simplifying technical review, procurement and international shipment.

---

Custom Drill Pipe Wiper Manufacturing

Not every drilling rig uses the same master bushing, rotary table or drill string arrangement.

SGPE supports Custom Drill Pipe Wiper manufacturing for non-standard sizes, legacy equipment and rig refurbishment projects.

Customers can provide an existing sample, dimensional drawing, hand sketch, photograph, technical specification or rig arrangement. Technical review then focuses on the wiper dimensions, wiping profile, rubber compound, reinforcement, installation method and drilling-fluid environment.

Custom manufacturing is useful for drilling contractors, offshore operators, workover companies, oilfield service providers, equipment distributors and procurement teams that need a configuration outside a standard catalog range.

---

SGPE Manufacturing and Project Support

SGPE supplies oilfield equipment and drilling-rig spare parts for international oil and gas projects. Support can cover new procurement, replacement requirements and consolidated rig-spare packages.

This project-based approach gives buyers a clear route from technical RFQ and product matching to factory quotation, manufacturing confirmation and export supply.

---

Drill Pipe Wiper Inspection and Quality Control

Although a pipe wiper has a relatively simple structure, dimensional accuracy and rubber condition directly affect installation and service performance.

When a purchase specification requires additional material testing, SGPE reviews the requested hardness, tensile strength, elongation or other properties before production.

---

Drill Pipe Wiper vs Tubing Wiper vs Wiper Dart

These products use similar names but perform different functions.

A buyer looking for the external rig-floor rubber component should specify Drill Pipe Wiper, Oilfield Pipe Wiper, Rubber Pipe Wiper, Flat Pipe Wiper or Dual Split Pipe Wiper rather than simply using the word “wiper.”

---

Is a Drill Pipe Wiper an API or Pressure-Control Product?

A Drill Pipe Wiper does not contain well pressure and does not replace an Annular BOP, Ram BOP, diverter, stripper or other well-control barrier.

Some RFQs and online searches use terms such as API Drill Pipe Wiper or reference API 7K. However, the product name alone does not establish an API monogram, certification or pressure rating.

If a tender specifies API 7K or another standard, certificate, material test or inspection document, send the exact requirement to SGPE for technical review.

---

Why Choose SGPE as Your Drill Pipe Wiper Manufacturer?

SGPE manufactures and supplies oilfield equipment and drilling-rig spare parts for international projects.

For pipe-wiper orders, technical selection goes beyond nominal drill pipe size. The final product should match the pipe OD, maximum tool joint OD, wiper dimensions, master bushing, rotary table arrangement, rubber compound, mud system and installation method.

The SGPE supply range includes Solid Pipe Wipers, Flat Solid Pipe Wipers, Low Profile Pipe Wipers, Dual Solid Pipe Wipers and Dual Split Pipe Wipers, together with Natural Rubber, NBR, oil-resistant, custom and compatible replacement configurations.

These products support land drilling rigs, offshore drilling units, workover rigs, maintenance programs, refurbishment projects and oilfield spare-parts procurement.

Buyers comparing a Drill Pipe Wiper Manufacturer or Supplier can send project dimensions and operating conditions for technical review before quotation.

For larger maintenance or procurement programs, SGPE can also combine pipe wipers with other drilling-rig spare parts in one consolidated order.

International customers sourcing Drill Pipe Wipers from China therefore have the option of standard supply, dimensional replacement or custom manufacturing according to the actual rig requirement.

---

Information Required for a Drill Pipe Wiper Quotation

For an accurate Drill Pipe Wiper price and factory quotation, provide the nominal drill pipe OD, maximum tool joint OD, required wiper OD, center bore, overall thickness and master bushing dimensions.

The RFQ should identify whether the project needs a solid, flat, low-profile, dual solid or Dual Split Pipe Wiper.

For material selection, specify whether the rig uses WBM, OBM or SBM, together with any Natural Rubber, NBR or other elastomer requirement.

For replacement work, an existing part number, drawing, sample or clear photographs can speed up technical matching.

The quantity, rig type, delivery destination and required inspection or documentation should also be included.

SGPE supports individual replacement orders, bulk Drill Pipe Wiper supply, custom manufacturing, project procurement and consolidated drilling-rig spare-parts packages.

---

Frequently Asked Questions About Drill Pipe Wipers

1. What is a Drill Pipe Wiper used for on an oil and gas drilling rig?

A Drill Pipe Wiper is used to remove drilling mud, mud cake, cuttings and excess fluid from the external surface of drill pipe during tripping and pipe-pulling operations. It normally sits around the drill string near the rotary table or master bushing, where the flexible rubber opening maintains contact with the pipe as crews pull the string out of the hole.

By removing fluid before the pipe reaches the working floor, an Oilfield Drill Pipe Wiper helps reduce mud carryover, fluid spillage and unnecessary contamination around the rig floor. It also gives crews a cleaner drill-string surface for handling, racking and visual inspection. Typical applications include routine trips, bit changes, BHA retrieval, MWD/LWD service, directional drilling and other drilling or workover operations that require repeated pipe movement.

2. What types of Drill Pipe Wipers does SGPE supply?

SGPE supplies Single Pipe Wipers, Solid Drill Pipe Wipers, Flat Solid Pipe Wipers, Low Profile Pipe Wipers, Dual Solid Pipe Wipers and Dual Split Drill Pipe Wipers for different drilling-rig layouts and installation requirements.

A solid configuration works well when crews can install the wiper over an accessible pipe end. Flat and low-profile designs suit rigs with limited vertical clearance around the rotary table or master bushing. A Dual Split Drill Pipe Wiper can be opened and installed around an existing drill string, which makes it particularly useful for offshore maintenance, workover operations and field replacement.

SGPE can also review Custom Drill Pipe Wipers for non-standard master bushings, legacy drilling equipment and rig refurbishment projects when standard catalog dimensions do not match the existing installation.

3. What is a Dual Split Drill Pipe Wiper and when should I use one?

A Dual Split Drill Pipe Wiper uses a split rubber body with two wiping sections. Unlike a one-piece solid wiper, crews can open the split body and install it around an existing drill string without requiring access to the pipe end.

This installation method makes Dual Split Pipe Wipers useful for offshore drilling rigs, workover rigs, active-rig maintenance, replacement projects and rig refurbishment, especially when removing the drill string only to install a wiper would be impractical.

Common industry Dual Split body OD references include 14, 17, 19, 22 and 26 inches, although the final configuration must still match the actual drill pipe OD, maximum tool joint OD, center bore and master bushing arrangement. Selected designs may also use steel or spring-steel reinforcement to help maintain the required body profile.

4. What is the difference between Solid, Flat, Low Profile and Dual Split Pipe Wipers?

A Solid Drill Pipe Wiper uses a one-piece molded rubber body and suits installations where crews can place the wiper over an accessible pipe end. It provides a simple and durable configuration for routine land and offshore drilling operations.

A Flat Solid Pipe Wiper uses a thinner body to reduce installation height, while a Low Profile Pipe Wiper provides an even more compact arrangement for restricted rig-floor layouts. These designs can be useful where rotary table components or pipe-handling equipment limit available vertical space.

A Dual Split Pipe Wiper uses a split wrap-around body with two wiping sections and can be installed around an existing string. The best configuration depends on the drill pipe, tool joint, master bushing, available clearance, drilling-fluid system and preferred installation method rather than pipe size alone.

5. What rubber materials are available for Drill Pipe Wipers?

SGPE commonly supplies Natural Rubber Drill Pipe Wipers and NBR Drill Pipe Wipers. The most suitable compound depends on the drilling fluid, hydrocarbon exposure, abrasion level and operating environment.

Natural rubber offers good elasticity and mechanical resilience for many conventional drilling applications and is often considered for water-based mud service where repeated pipe contact and abrasion are the main wear mechanisms.

A Nitrile Rubber Drill Pipe Wiper, also known as an NBR Pipe Wiper, provides improved resistance to petroleum oils and hydrocarbons. It is therefore commonly considered for oil-based mud, offshore drilling and selected workover applications with oil exposure.

Final material selection should always consider the actual drilling-fluid formulation, additives and service temperature rather than relying only on the general WBM or OBM classification.

6. Can SGPE supply Drill Pipe Wipers for WBM, OBM and SBM drilling fluids?

Yes. SGPE can review Drill Pipe Wipers for water-based mud, oil-based mud and synthetic-based mud applications, with the final elastomer selected according to the actual fluid system and operating conditions.

For WBM Drill Pipe Wipers, flexibility and abrasion resistance are important because the fluid can contain barite, salts, polymers and drilled solids. Natural rubber can provide a practical material direction for many conventional WBM applications.

An OBM Drill Pipe Wiper requires greater resistance to petroleum and hydrocarbon exposure, so NBR is commonly considered. Synthetic-based mud also requires a compatibility review because the base fluid and additives can affect elastomer performance.

Providing the mud type, base fluid, additives and expected temperature allows SGPE to review the rubber compound more accurately before production.

7. How do I select the correct Drill Pipe Wiper size?

The correct Drill Pipe Wiper size should not be selected from nominal drill pipe OD alone. Start with the drill pipe OD and maximum tool joint OD, then confirm the required wiper body OD, center bore or cut-out, overall thickness, master bushing opening and rotary table arrangement.

The center opening needs enough contact to wipe the pipe effectively while still allowing the larger tool joint to pass without excessive interference. At the same time, the outside diameter and thickness must fit the support area and available installation space around the master bushing.

For new installations, a dimensional drawing or rotary table information is helpful. For replacement projects, existing wiper measurements and clear photographs usually provide the fastest route to identifying the correct Oilfield Pipe Wiper configuration.

8. Can SGPE supply 5 Inch, 17 Inch, 19 Inch, 22 Inch and 26 Inch Drill Pipe Wipers?

SGPE can review these common industry size requirements, but buyers should distinguish between drill pipe size and wiper body OD when preparing an RFQ.

A 5 Inch Drill Pipe Wiper normally refers to the nominal drill pipe or center-opening requirement. By contrast, descriptions such as 17 Inch, 19 Inch, 22 Inch or 26 Inch Pipe Wiper often refer to the outside diameter of the wiper body.

For example, a 22 Inch Dual Split Drill Pipe Wiper for 5 Inch Drill Pipe combines a 22-inch body with a center opening selected according to the actual pipe and maximum tool joint OD.

Because not every bore is available with every body OD or wiping profile, SGPE recommends providing both the drill-string dimensions and master bushing information before the final size is confirmed.

9. Can Drill Pipe Wipers be used on land rigs, offshore rigs and workover rigs?

Yes. Drill Pipe Wipers can support land drilling rigs, offshore drilling units and selected workover operations when the dimensions, construction and rubber compound match the actual equipment and service environment.

Land rigs commonly use solid, flat or dual wipers during routine tripping, bit changes, BHA work, mud motor maintenance and drill-string inspection. Offshore drilling rigs may prefer Flat, Low Profile or Dual Split Drill Pipe Wipers where installation space around the rotary table is limited.

During workover operations, suitable split or wrap-around wipers can remove mud, oil and well fluid from tubular surfaces as crews pull the string. Directional and horizontal drilling programs may also benefit from reliable wiping because repeated MWD/LWD, mud motor, RSS and BHA trips increase the frequency of pipe movement through the rig floor.

10. Can SGPE supply aftermarket Replacement Drill Pipe Wipers for existing or legacy rigs?

Yes. SGPE supports aftermarket and Replacement Drill Pipe Wipers for active rigs, legacy drilling equipment, maintenance programs and refurbishment projects.

An original part number is useful, but it is not always required. Technical matching can also begin from an existing physical sample, dimensional drawing, molded identification, field measurements or clear photographs.

For accurate replacement, SGPE normally reviews the wiper OD, center bore, overall thickness, wiping profile, drill pipe OD, maximum tool joint OD, master bushing dimensions, reinforcement and rubber material.

This approach is useful when an original spare part is obsolete, unavailable or difficult to identify. Multi-rig operators can also combine several replacement sizes within a consolidated drilling-rig spare-parts order.

11. Can SGPE manufacture a Custom Drill Pipe Wiper without the original part number?

Yes. SGPE can review Custom Drill Pipe Wiper manufacturing even when the original part number or manufacturer information is unavailable.

A clear dimensional sketch showing the outside diameter, center bore and overall thickness usually provides a good starting point. Photographs of the top, bottom, side and center opening can help identify the wiping profile, split construction and reinforcement arrangement.

Additional information about the drill pipe OD, maximum tool joint OD, master bushing, rotary table, drilling-fluid system and rubber material further improves technical accuracy.

This service is particularly useful for older drilling rigs, offshore equipment, workover rigs, refurbishment projects and non-standard master bushing arrangements where a conventional catalog wiper does not fit the existing installation.

12. How can I get a Drill Pipe Wiper price or factory quotation from SGPE?

For an accurate Drill Pipe Wiper price and factory quotation, provide the drill pipe OD, maximum tool joint OD, required wiper OD, center bore, overall thickness and master bushing dimensions. The inquiry should also identify whether the project requires a solid, flat, low-profile, dual solid or Dual Split configuration.

Please include the drilling-fluid system, such as WBM, OBM or SBM, together with any Natural Rubber, NBR or other elastomer requirement. Quantity, rig type, delivery destination and required inspection or documentation should also be provided where available.

For a Replacement Drill Pipe Wiper, an existing part number, dimensional drawing, sample or clear photographs can speed up technical matching.

Based on the project information, SGPE will review the operating conditions and dimensions, recommend a suitable Drill Pipe Wiper configuration and provide the corresponding technical and commercial quotation.

---

Request a Drill Pipe Wiper Quote from SGPE

SGPE supplies Drill Pipe Wipers for land rigs, offshore drilling units and workover operations, including solid, flat, low-profile, dual solid and dual split designs. Natural Rubber and NBR options are available for WBM, OBM and SBM service, with custom and replacement configurations supported for new or legacy equipment.

For an accurate quotation, please provide the drill pipe OD, maximum tool joint OD, wiper OD, center bore, thickness, master bushing dimensions, required type, drilling-fluid system, quantity and delivery destination. For replacement requirements, you may also send an existing part number, drawing, sample or clear photographs.

Based on your project details, SGPE will review the technical requirements and provide a suitable Drill Pipe Wiper configuration together with the corresponding quotation.

E-Mail:
info@sgpe.com