Description
High G Drying Shaker for WBM Drilling Waste Treatment & Drilling Fluid Recovery
SGPE manufactures and supplies High G Drying Shaker equipment for drill cuttings drying, drilling fluid recovery, oilfield solids control, and drilling waste management.
Also known as a High G Dryer, Hi-G Dryer, High G Force Drying Shaker, or High G Shale Shaker, the unit provides a secondary separation stage after the primary shale shaker, mud cleaner, desander, or desilter.
The High G Dryer receives concentrated wet drill cuttings that still contain recoverable drilling fluid. High-intensity linear vibration spreads the solids across the shaker screens. Free liquid passes through the screening surface into the collection section, while drier cuttings move toward the discharge.
This makes the equipment particularly suitable for water-based mud (WBM) cuttings treatment, drilling fluid recovery, drill cuttings drying, high-ROP drilling, large-hole sections, horizontal and shale gas drilling, closed-loop drilling, pitless drilling, and onshore or offshore drilling waste management.
SGPE can supply a standalone drying shaker or integrate it with screw conveyors, mud recovery tanks, centrifuge feed pumps, drilling mud decanter centrifuges, vertical cuttings dryers, and complete drilling waste management systems.
For technical selection or quotation, send us your mud type, estimated wet cuttings rate, rig type, electrical supply, available installation space, and project location.
Contact: Contact Us for a Quote
Email: info@sgpe.com
Tel / WhatsApp: +86 186-1599-5239
High G Drying Shaker at a Glance
| Item | Typical Configuration |
|---|---|
| Product | High G Drying Shaker |
| Common Names | High G Dryer / Hi-G Dryer / Drying Shaker |
| Equipment Category | Drilling Waste Management Equipment |
| Main Duty | Secondary Drill Cuttings Drying |
| Secondary Duty | Drilling Fluid Recovery |
| Motion | Linear Motion |
| Feed Material | Concentrated Wet Drill Cuttings |
| Primary Mud Application | WBM |
| Additional Duty | Selected OBM / SBM after Technical Review |
| Screen Arrangement | Typically 3–4 Panels |
| G-Force | Adjustable High-G Configuration |
| Deck Angle | Adjustable |
| Screen Type | Pretensioned / Composite Frame |
| Screen Selection | API-Designated Options |
| Feed Options | Hopper / Gravity / Top Feed / Screw Conveyor |
| Fluid Outlet | Mud Recovery Tank / Centrifuge Feed Tank |
| Solids Outlet | Screw Conveyor / Cuttings Box / Waste Skip |
| Installation | Skid / Tank / Integrated Package |
| Rig Application | Onshore / Offshore |
| Electrical Supply | Customized to Rig Requirements |
| Hazardous-Area Options | Available Where Required |
| System Integration | Conveyor + Tank + Pump + Decanter Centrifuge |
What Is a High G Drying Shaker?
A High G Drying Shaker is a secondary solids separation machine used to recover residual drilling fluid from wet drill cuttings.
A conventional shale shaker performs primary solids control. Returning drilling mud enters the shaker, coarse drilled solids are removed, and most usable fluid continues toward the active mud system.
The discharged cuttings, however, are often still wet.
They may retain water-based mud, oil-based mud, or synthetic-based fluid. If those solids go directly to a cuttings box or waste skip, recoverable drilling fluid leaves the mud system with them.
The result is more liquid in the waste stream, greater storage and transportation weight, and additional load on downstream waste handling equipment.
The High G Dryer adds another mechanical separation stage.
Dual vibration motors generate strong linear motion across the shaker basket. The vibration helps release free liquid while carrying the cuttings toward the solids discharge.
Recovered drilling fluid passes through the screens and collects below the deck. From there, it can move to a mud recovery tank, centrifuge feed tank, or decanter centrifuge for further treatment.
The drier solids continue to a screw conveyor, cuttings box, waste skip, drilling waste tank, solidification unit, or another approved treatment process.
In practical terms, the primary shale shaker cleans the circulating mud. The High G Dryer performs secondary cuttings drying and drilling fluid recovery after primary solids separation.
High G Drying Shaker Technical Specifications
High G Dryer selection should begin with the actual drilling waste duty rather than one catalog capacity figure.
SGPE reviews the drilling fluid system, wet cuttings generation rate, shaker screen requirement, rig layout, electrical supply, area classification, installation conditions, and downstream treatment equipment before confirming the configuration.
Preliminary Engineering Reference
| Technical Parameter | Typical Engineering Reference |
|---|---|
| Vibration Motion | Linear Motion |
| Reference Liquid Capacity | Approx. 120–140 m³/h / 528–616 GPM* |
| High G-Force | Approx. 7–8+ G on Comparable Configurations* |
| Vibration Motors | Dual Motors |
| Typical Motor Power | Approx. 2 × 1.5–1.94 kW* |
| Screen Quantity | Typically 3–4 Panels |
| Effective Screen Area | Approx. 2.6–2.73 m²* |
| Deck Angle | Approx. -1° to +5°* |
| Screen Type | Pretensioned / Composite Frame |
| Feed Arrangement | Hopper / Top Feed / Screw Conveyor |
| Electrical Frequency | 50 / 60 Hz |
| Voltage | Customized to Rig Supply |
| Hazardous-Area Options | Ex-Rated Components Where Specified |
| IECEx / ATEX | According to Selected Certified Components |
| Installation | Skid / Tank / Integrated Waste Package |
| Onshore Configuration | Available |
| Offshore Configuration | Available |
*The values above are preliminary engineering benchmarks for comparable High-G drying shaker configurations. They are not fixed SGPE model ratings or guaranteed project performance.
SGPE confirms the final High G Drying Shaker specifications after reviewing the operating conditions. The approved project datasheet can define motor power, maximum G-force, screen dimensions, effective screen area, capacity, dimensions, operating weight, voltage, hazardous-area requirements, and other project-specific data.
High G Drying Shaker Capacity & Throughput
Buyers often compare High G Drying Shaker capacity, High G Dryer capacity, cuttings dryer capacity, drying shaker GPM, and drilling waste shaker throughput.
For this type of equipment, however, one nominal m³/h or GPM figure does not tell the whole story.
A primary shale shaker mainly receives circulating drilling fluid. A High G Dryer receives a much more concentrated stream of solids and residual mud. Practical throughput therefore depends heavily on the condition of the cuttings.
| Capacity Factor | Effect on Performance |
|---|---|
| Wet Cuttings Rate | Determines total solids loading |
| Solids-to-Liquid Ratio | Changes screen load and fluid recovery |
| Mud Weight | Influences fluid and solids behavior |
| Mud Viscosity | Higher viscosity can reduce screen transmission |
| Cuttings Size | Affects solids conveyance |
| Formation Type | Sticky solids can increase screen blinding |
| Rate of Penetration | High ROP can create feed surges |
| API Screen Designation | Finer separation can reduce throughput |
| Effective Screen Area | More usable area improves load distribution |
| G-Force | Influences free-liquid release |
| Deck Angle | Changes retention time |
| Feed Consistency | Uneven feed reduces operating stability |
| Target Dryness | Higher drying targets can reduce practical throughput |
A high-viscosity WBM stream, for example, may pass through the screens more slowly than a lighter drilling fluid.
Sticky or reactive cuttings can increase screen blinding. A sudden rise in ROP can also create a short-term solids load well above the normal average.
For more reliable equipment sizing, SGPE recommends providing both the average and peak wet cuttings generation rate whenever possible.
G-Force, Deck Angle & Shaker Screen Performance
High-G Linear Motion
High-G linear motion performs two jobs at the same time.
Strong vibration helps release free drilling fluid from the cuttings, while linear motion carries those solids toward the discharge end.
Higher acceleration can improve separation, but maximum G-force is not always the best operating condition.
Excessive vibration can shorten screen life and increase mechanical loading on the shaker basket, motor mounts, fasteners, and supporting structure.
The correct operating point balances drilling fluid recovery, cuttings dryness, solids transport, throughput, shaker screen life, and equipment reliability.
Adjustable Deck Angle
The adjustable deck gives the operator another way to control performance.
A higher uphill angle normally keeps the cuttings on the screen longer. When feed conditions allow, that additional retention time can improve fluid recovery.
A flatter deck moves solids toward the discharge more quickly and can help when throughput becomes the priority.
Deck adjustment becomes particularly useful when formation, hole size, mud properties, ROP, or screen selection changes.
High G Dryer Screen Selection
The High G Dryer screen directly affects drilling fluid recovery, processing capacity, solids separation, and screen life.
SGPE can configure the equipment with pretensioned or composite-frame shaker screens and select different screen designations according to the drilling conditions.
| Operating Condition | Screen Priority | Main Consideration |
|---|---|---|
| High Wet Cuttings Load | High conductance and usable area | Prevent overloading |
| High-Viscosity WBM | Balanced separation | Reduce blinding |
| Fine Solids | Finer API designation | Maintain practical throughput |
| High ROP | Good solids conveyance | Manage feed surges |
| Large-Hole Section | High capacity | Handle peak solids loading |
| Sticky Formation | Blinding resistance | Reduce screen plugging |
| Downstream Centrifuge | Balanced cut point | Control fine-solids loading |
| Offshore Rig | Reliability | Spare-parts planning |
| Remote Rig | Longer screen life | Logistics |
| High Mud Recovery Target | Good liquid transmission | Reduce fluid losses |
Where required, screen selection can reference API RP 13C / ISO 13501 screen designation.
The finest available screen does not automatically give the best field result.
If the screen is too fine for the actual cuttings and mud properties, it may blind quickly and reduce throughput. A coarser screen may process more material, although additional fine solids can remain in the recovered mud.
SGPE therefore reviews mud weight, viscosity, solids concentration, cuttings size, ROP, fluid recovery target, screen life, and downstream centrifuge duty before recommending a screen arrangement.
How a High G Dryer Works in a Drilling Waste System
The High G Dryer normally operates downstream of the rig’s primary solids control equipment.
Drilling mud first returns from the well and enters the primary shale shaker. The shaker removes coarse drilled solids and returns most usable fluid toward the active mud system.
The discharged cuttings still contain residual drilling fluid.
A screw conveyor, gravity chute, or customized transfer arrangement carries those wet cuttings to the High G Dryer.
Inside the unit, high-intensity linear motion spreads the feed across the screen deck. Free liquid passes through the screens while the drier solids move toward the discharge.
Recovered drilling fluid enters the collection section or mud recovery tank.
When finer solids separation is required, a centrifuge feed pump transfers the recovered mud to a drilling mud decanter centrifuge.
A typical WBM drilling waste treatment process follows:
Primary Shale Shaker → Screw Conveyor → High G Drying Shaker → Mud Recovery Tank → Centrifuge Feed Pump → Decanter Centrifuge → Treated Drilling Fluid
The solids follow a separate route:
High G Dryer → Screw Conveyor → Cuttings Box / Waste Skip / Solidification / Further Treatment
This arrangement gives the rig another opportunity to recover usable drilling fluid before the cuttings leave the mud system.
High G Dryer Design & Configuration Options
Separation System
The core separation system combines high-intensity linear motion, an adjustable screen deck, and multiple shaker screen panels.
A larger usable screening surface distributes the concentrated solids more evenly and helps limit localized overloading. Screen selection and deck angle can then be adjusted as drilling conditions change.
Structure & Maintenance Access
High-G operation creates significant dynamic loading, so the basket and supporting structure need sufficient strength for continuous oilfield service.
The screen fastening system should also allow crews to replace worn, torn, or blinded screens without unnecessary downtime.
Feed, Discharge & Mud Recovery
The feed arrangement can be matched to the rig layout. Depending on the project, wet cuttings can enter through a hopper, gravity feed, top feed, or screw conveyor.
Recovered fluid collects beneath the screen deck and can flow to a mud recovery tank, centrifuge feed tank, or further treatment stage.
The solids discharge can connect to a screw conveyor, cuttings box, waste skip, drilling waste tank, or solidification system.
Electrical & Offshore Options
SGPE can match the electrical package to the rig voltage, 50 Hz or 60 Hz frequency, ambient conditions, and hazardous-area requirements.
Where specified, the equipment can use explosion-proof motors and selected IECEx or ATEX-certified components.
| Configuration | Available Options |
|---|---|
| Screen Deck | 3-Panel / 4-Panel / Project-Specific |
| Screen Type | Pretensioned / Composite Frame |
| Screen Designation | API Options |
| G-Force | Adjustable High-G |
| Deck Angle | Adjustable |
| Basket | Reinforced Structure |
| Frame | Heavy-Duty Fabricated Steel |
| Wetted Area | Carbon Steel / Stainless-Steel Options |
| Feed Arrangement | Hopper / Top Feed / Gravity / Conveyor |
| Discharge Chute | Standard / Customized |
| Mud Collection | Integrated |
| Mud Recovery Tank | Optional |
| Centrifuge Feed Pump | Optional |
| Installation | Skid / Tank / Integrated Package |
| Offshore Skid | Available |
| Lifting Arrangement | Customized |
| Voltage / Frequency | Customized / 50 Hz / 60 Hz |
| Explosion-Proof Motors | Available |
| Offshore Coating | Available |
| Decanter Centrifuge Integration | Available |
| Vertical Cuttings Dryer Integration | Available |
| Complete Drilling Waste Package | Available |
High G Drying Shaker Applications
WBM Cuttings Drying & Drilling Fluid Recovery
Water-based mud drilling waste treatment is one of the main applications for a High G Dryer.
Wet WBM cuttings can retain a considerable amount of reusable drilling fluid, particularly during high-ROP drilling, large surface-hole sections, soft formations, horizontal wells, and multi-well programs.
A High G Dryer for WBM adds secondary separation after the primary shale shaker and recovers more free drilling fluid before the solids enter storage, transport, or further treatment.
Recovered mud can then move to a decanter centrifuge. Drier cuttings continue to a screw conveyor, cuttings box, or waste skip.
For operators looking for WBM cuttings drying equipment, drilling fluid recovery equipment, drill cuttings drying equipment, or drilling waste management equipment, the High G Dryer provides a relatively straightforward mechanical treatment stage.
High-ROP, Large-Hole & Horizontal Drilling
High ROP and large-diameter hole sections can generate a large quantity of drilled solids in a short period.
Horizontal and extended-reach wells create a different challenge because they can sustain significant cuttings generation over longer intervals.
A High G Dryer provides another separation stage between the primary shale shaker and final waste handling.
Typical applications include surface-hole drilling, intermediate sections, horizontal oil and gas wells, directional wells, shale gas wells, extended-reach wells, and long lateral sections.
For these applications, peak wet cuttings loading is usually more useful for sizing than average mud circulation rate alone.
Shale Gas, Pad & Multi-Well Operations
Shale gas and pad drilling programs often combine high ROP, long laterals, repeated drilling cycles, and centralized solids control equipment.
A modular drilling cuttings management system can combine the High G Dryer with screw conveyors, a mud recovery tank, centrifuge feed pump, VFD decanter centrifuge, waste skips, and electrical controls.
The modular arrangement can also simplify relocation between wells or drilling pads.
Onshore & Remote Drilling
Land rigs may face limits on waste storage, trucking, disposal distance, available rig-site space, and drilling fluid cost.
Recovering more free liquid before the cuttings enter waste storage can reduce unnecessary liquid handling and transportation.
For remote operations, drier solids can also simplify cuttings transfer and reduce the frequency of waste-container handling.
Offshore High G Dryer
Offshore drilling adds tighter requirements for footprint, lifting, corrosion protection, maintenance access, electrical safety, and hazardous-area compliance.
An offshore High G Dryer can support fixed platforms, jack-up rigs, semi-submersibles, drillships, offshore workover units, and modular drilling waste packages.
| Offshore Design Input | Engineering Consideration |
|---|---|
| Deck Space | Equipment Footprint |
| Feed Elevation | Conveyor / Feeder Layout |
| Discharge Height | Downstream Conveyor Interface |
| Lifting Requirement | Lifting Arrangement |
| Electrical Supply | Voltage / Frequency |
| Hazardous Area | Motor / Control Selection |
| Marine Environment | Coating / Corrosion Protection |
| Maintenance Access | Screen / Motor Clearance |
| Waste Route | Conveyor / Skip / Tank |
| Centrifuge Location | Pump / Piping Layout |
SGPE can review the rig layout, available deck space, feed elevation, discharge route, lifting requirement, and electrical specification before confirming the offshore configuration.
Closed-Loop, Pitless & Zero-Discharge Drilling
A closed-loop drilling waste management system keeps drilling fluid and drilling waste inside a controlled mechanical treatment process.
A pitless drilling system reduces dependence on open reserve pits and instead uses mechanical separation equipment, tanks, conveyors, and controlled waste handling.
The High G Dryer provides secondary drilling fluid recovery in both arrangements.
After primary solids control, wet cuttings move to the drying shaker. Recovered liquid continues toward a recovery tank and centrifuge, while drier solids move to storage or further treatment.
Selected zero-discharge projects can use the same secondary drying stage to reduce free liquid before downstream waste processing.
High G Dryer & Decanter Centrifuge System
A High G Dryer and Decanter Centrifuge system combines secondary cuttings drying with fine-solids separation.
The High G Dryer first removes coarse solids and recovers free drilling fluid from the wet cuttings.
That recovered fluid can still contain fine and ultra-fine particles. A decanter centrifuge processes the liquid again to remove a finer solids fraction before the fluid is evaluated for reuse or further treatment.
| Stage | Equipment | Main Duty |
|---|---|---|
| 1 | Primary Shale Shaker | Primary solids separation |
| 2 | Screw Conveyor | Wet cuttings transfer |
| 3 | High G Drying Shaker | Secondary cuttings drying |
| 4 | Mud Recovery Tank | Recovered fluid collection |
| 5 | Centrifuge Feed Pump | Fluid transfer |
| 6 | Decanter Centrifuge | Fine-solids separation |
| 7 | Active Mud System / Further Treatment | Treated fluid handling |
| 8 | Waste Conveyor / Skip | Drier solids handling |
This two-stage arrangement gives operators more control over both drilling fluid recovery and drilling waste volume.
SGPE can also integrate VFD decanter centrifuges, mud tanks, transfer pumps, screw conveyors, and electrical controls into a complete WBM drilling waste management system, drilling mud recovery system, or drilling cuttings treatment package.
High G Dryer vs. Standard Shale Shaker
| Comparison | Standard Shale Shaker | High G Dryer |
|---|---|---|
| Main Duty | Primary Solids Control | Secondary Cuttings Drying |
| Feed | Circulating Drilling Mud | Concentrated Wet Cuttings |
| Position | Front-End Solids Control | Downstream of Primary Shaker |
| Main Objective | Remove Drilled Solids | Recover Residual Fluid |
| Solids Loading | Lower | Higher |
| Output | Cleaned Mud + Wet Cuttings | Recovered Fluid + Drier Cuttings |
| Typical Next Stage | Mud Cleaner / Centrifuge | Conveyor / Centrifuge / Waste Handling |
| Main System | Active Mud System | Drilling Waste Management |
The two machines perform different jobs.
A standard shale shaker protects the active drilling fluid system. A High G Dryer processes the concentrated wet solids that leave primary separation.
For many drilling waste systems, the two machines work together rather than replace each other.
High G Dryer vs. Vertical Cuttings Dryer
| Item | High G Dryer | Vertical Cuttings Dryer |
|---|---|---|
| Separation Principle | High-G Vibration | Centrifugal Force |
| Separation Element | Shaker Screen | Screen Basket |
| Common Application | Strong WBM Application | Common in OBM / SBM |
| Solids Movement | Linear | Centrifugal |
| Mechanical Complexity | Lower | Higher |
| Routine Maintenance | Relatively Straightforward | More Specialized |
| System Integration | Conveyor + Centrifuge | Conveyor + Centrifuge |
| Selection Focus | Throughput / WBM Duty / Simplicity | Lower Retained-Liquid Target |
A High G Dryer often suits water-based drilling waste when operators need straightforward operation, good solids handling capacity, and easy shaker screen replacement.
A Vertical Cuttings Dryer often becomes more suitable for demanding OBM or SBM applications where retained liquid on solids is a key performance target.
For selected oil-based or synthetic-based mud projects, SGPE reviews the mud system, wet cuttings rate, target dryness, drilling fluid value, available installation space, and downstream treatment process before recommending the equipment.
High G Dryer Installation, Operation & Maintenance
A High G Dryer can operate on an independent skid, low-profile tank, drilling waste tank, common solids control skid, offshore structural skid, or modular drilling waste package.
The installation should provide enough access for shaker screen replacement, vibration motor inspection, deck adjustment, cuttings feed, solids discharge, conveyor maintenance, lifting, and electrical work.
Because High-G operation creates dynamic loading, the supporting structure must be suitable for the expected vibration loads.
During service, crews should inspect the shaker screens, locking system, vibration motor mounts, basket fasteners, structural connections, electrical cables, seals, feed distribution, fluid collection area, and solids discharge.
Damaged screens should be replaced promptly. A torn screen can allow excessive solids into the recovered drilling fluid and increase the load on the downstream centrifuge.
Stable feeding is equally important. Repeated overloading can cause screen blinding, solids buildup, poor mud recovery, uneven solids conveyance, and faster screen wear.
High G Dryer Spare Parts
| Spare Part | Main Purpose |
|---|---|
| Shaker Screens | Routine Replacement |
| Screen Locking Parts | Screen Installation |
| Rubber Seals | Maintain Sealing |
| Motor-Related Spares | Vibration System Maintenance |
| Fasteners | High-Vibration Service |
| Electrical Components | Control System Maintenance |
| Control Switches | Field Replacement |
| Cable Glands | Electrical Protection |
| Wear Parts | Routine Service |
| Maintenance Kit | Preventive Maintenance |
SGPE can prepare a spare-parts package according to the selected equipment configuration, project duration, expected operating hours, duty cycle, and rig location.
For offshore and remote projects, customers should consider spare screens and critical maintenance parts before shipment because replacement logistics may take longer.
High G Drying Shaker Price, Selection & Quotation
There is no single standard High G Drying Shaker price because the final cost depends on the required equipment configuration.
Major cost factors include shaker size, screen arrangement, vibration motor specification, G-force configuration, electrical supply, hazardous-area requirements, offshore coating, skid and lifting design, feed and discharge layout, mud recovery tank, centrifuge feed pump, spare screens, and system integration.
A standalone High G Dryer for a land rig therefore has a different cost structure from an offshore package that requires Ex-rated electrical equipment, marine corrosion protection, customized lifting points, conveyor interfaces, and decanter centrifuge integration.
For preliminary High G Dryer selection, the following information is particularly useful:
| Selection Data | Required Information |
|---|---|
| Mud Type | WBM / OBM / SBM |
| Wet Cuttings Rate | Average and Peak |
| Processing Duty | Project Requirement |
| Rig Type | Land / Platform / Jack-Up / Semi / Drillship |
| Installation | Onshore / Offshore |
| Available Space | L × W × H |
| Voltage | Rig Supply |
| Frequency | 50 / 60 Hz |
| Hazardous Area | Classification if Applicable |
| Project Location | Country / Field |
| Required Delivery | Project Schedule |
If available, also send mud weight, viscosity, hole size, ROP, formation type, existing primary shale shaker information, API screen requirement, target dryness, downstream centrifuge information, feed elevation, discharge height, ambient temperature, and rig layout.
For a High G Drying Shaker quotation, send the project information currently available. Complete technical data is useful, but it is not required before the first equipment review.
High G Drying Shaker Manufacturer & Supplier
SGPE manufactures and supplies High G Drying Shakers, Hi-G Dryers, High G Shale Shakers, WBM Cuttings Dryers, drilling fluid recovery equipment, and integrated drilling waste management packages for oil and gas drilling projects.
Equipment selection is based on the complete operating duty rather than one nominal capacity figure.
SGPE can review the wet cuttings load, drilling fluid properties, shaker screen requirements, G-force, deck angle, feed arrangement, electrical specification, rig layout, hazardous-area requirements, and downstream treatment equipment.
Project support can include equipment selection, WBM waste system review, shaker screen selection, screw conveyor integration, mud recovery tank arrangement, decanter centrifuge matching, offshore layout review, electrical configuration, spare-parts planning, technical documentation, export packing, and international shipment.
Whether the project requires one drill cuttings drying machine or a complete drilling waste management system, SGPE can review the available operating data and recommend a suitable configuration.
Frequently Asked Questions About High G Drying Shakers
1. What is a High G Drying Shaker used for?
A High G Drying Shaker is used for secondary drill cuttings drying and drilling fluid recovery after primary solids control. It normally receives concentrated wet cuttings discharged from the primary shale shaker and uses high-intensity linear motion to release additional free drilling fluid through the shaker screens.
The equipment is particularly useful in WBM drilling waste treatment, high-ROP drilling, large-hole sections, horizontal wells, shale gas projects, closed-loop drilling, pitless drilling, and other drilling waste management applications where reducing free liquid in the discharged cuttings can improve mud recovery and downstream solids handling.
2. Is a High G Dryer the same as a drilling shale shaker?
No. A conventional drilling shale shaker and a High G Dryer perform different functions within the solids control and drilling waste treatment process.
The primary shale shaker processes circulating drilling mud and removes drilled solids before the fluid returns to the active mud system. A High G Drying Shaker works downstream and treats the concentrated wet cuttings already discharged by that primary equipment.
Its main purpose is to recover additional residual drilling fluid and produce drier solids for transport, storage, or further waste treatment. In many land and offshore drilling systems, the two machines work together rather than replace each other.
3. Is a High G Drying Shaker suitable for water-based mud?
Yes. Water-based mud drilling waste treatment is one of the main applications for a High G Drying Shaker. Wet WBM cuttings can still retain recoverable drilling fluid after passing through the primary shale shaker, especially during high-ROP drilling, large surface-hole sections, soft formations, and horizontal drilling.
A High G Dryer for WBM provides an additional mechanical separation stage before the cuttings enter a waste skip, cuttings box, or other downstream treatment process. The recovered drilling mud can be collected in a recovery tank and, where required, transferred to a decanter centrifuge for finer solids separation.
4. Can a High G Dryer process OBM or SBM cuttings?
A High G Dryer can process selected oil-based mud (OBM) and synthetic-based mud (SBM) waste streams, but the final equipment choice should depend on the actual drilling fluid properties, cuttings loading, required dryness, fluid value, and downstream waste treatment target.
For demanding OBM or SBM projects where a low retained-liquid level on solids is a primary objective, a Vertical Cuttings Dryer may be more suitable. SGPE therefore reviews the mud system, wet cuttings rate, installation space, recovery requirement, and final disposal process before recommending either a High G Dryer, Vertical Cuttings Dryer, or integrated drilling waste treatment solution.
5. High G Dryer or Vertical Cuttings Dryer: which one should I choose?
A High G Dryer uses high-G linear vibration and shaker screens to recover drilling fluid from wet cuttings. It is commonly selected for WBM applications where operators require good solids throughput, straightforward operation, adjustable screening conditions, and relatively simple routine maintenance.
A Vertical Cuttings Dryer uses centrifugal force and a screen basket and is often selected for more demanding OBM or SBM service. The correct choice depends on the drilling fluid type, average and peak wet cuttings rate, target dryness, required fluid recovery, available rig space, hazardous-area requirements, and waste disposal plan.
SGPE can review these operating conditions before recommending the most suitable cuttings drying equipment.
6. What G-force does a High G Drying Shaker need?
There is no single G-force value that is ideal for every drilling condition. Comparable High-G drying shaker configurations commonly operate in approximately the 7–8+ G range, but this should be treated as an engineering reference rather than a fixed SGPE model rating.
Actual performance also depends on mud viscosity, solids concentration, cuttings size, shaker screen selection, feed rate, deck angle, screen area, and target dryness. Higher G-force alone does not automatically produce better results because excessive vibration can increase mechanical loading and shorten shaker screen life.
The correct operating point should balance drilling fluid recovery, throughput, cuttings dryness, screen life, and equipment reliability.
7. What shaker screens are used on a High G Dryer?
High G Dryers can use pretensioned or composite-frame shaker screens with different screen designations depending on the drilling conditions. Where required, screen selection can reference API RP 13C / ISO 13501 screen designation.
The best screen is not simply the finest available option. High-viscosity WBM, sticky formations, high ROP, fine solids, peak cuttings loading, and downstream centrifuge duty can all influence the correct screen choice.
A screen that is too fine may blind quickly and reduce throughput, while a coarser screen may improve processing capacity but allow more fine solids into the recovered mud. SGPE therefore matches the screen arrangement to the actual waste stream and recovery target.
8. What determines High G Drying Shaker capacity?
The actual High G Drying Shaker capacity depends on more than one nominal liquid-flow figure. Because the unit handles concentrated wet cuttings rather than normal circulating drilling mud, practical throughput is strongly affected by the solids-to-liquid ratio and the physical condition of the drilling waste.
Important factors include the average and peak wet cuttings rate, mud weight, mud viscosity, formation type, cuttings size, ROP, shaker screen designation, effective screen area, G-force, deck angle, feed consistency, and required dryness.
For high-ROP drilling, large-hole sections, horizontal wells, and shale gas projects, SGPE recommends using the peak wet cuttings generation rate as an important sizing input rather than relying only on average mud circulation volume.
9. Can a High G Dryer work with a decanter centrifuge?
Yes. A High G Dryer and Decanter Centrifuge system is a common configuration for WBM drilling waste treatment and drilling fluid recovery.
The High G Drying Shaker first removes coarse solids and recovers free drilling fluid from the wet cuttings. The recovered mud can then enter a mud recovery tank and be pumped to a decanter centrifuge, where finer solids are separated from the liquid.
A typical system may include a primary shale shaker, screw conveyor, High G Dryer, recovery tank, centrifuge feed pump, decanter centrifuge, and solids handling equipment. This staged process allows both coarse and fine solids separation within the same drilling waste management system.
10. Can SGPE supply a High G Drying Shaker for offshore drilling?
Yes. SGPE can configure an offshore High G Dryer for fixed platforms, jack-up rigs, semi-submersibles, drillships, offshore workover units, and modular drilling waste management packages.
Offshore equipment selection normally requires additional consideration of available deck space, feed elevation, discharge height, lifting arrangement, corrosion protection, maintenance access, rig voltage and frequency, hazardous-area classification, and the location of downstream conveyors, tanks, or decanter centrifuges.
Where specified, the package can also use explosion-proof motors and selected IECEx or ATEX-certified components according to the project requirements.
11. What information is required for a High G Drying Shaker quotation?
For a High G Drying Shaker quotation, the most useful starting information includes the drilling fluid type, average and peak wet cuttings rate, rig type, available installation space, voltage, frequency, hazardous-area classification, project location, and required delivery schedule.
If available, customers can also provide mud weight, viscosity, hole size, ROP, formation type, primary shale shaker information, API screen requirement, drying or mud-recovery target, downstream decanter centrifuge information, feed elevation, discharge height, ambient temperature, and rig layout. Complete data is not required before the first technical review.
SGPE can evaluate the information already available, identify any additional parameters needed, recommend a suitable configuration, and prepare the corresponding technical and commercial quotation.
12. Can SGPE supply a complete drilling waste management system?
Yes. In addition to a standalone High G Drying Shaker, SGPE can supply an integrated drilling waste management system according to the drilling fluid, waste volume, rig layout, installation conditions, and treatment target.
A complete package can combine primary shale shakers, High G Dryers, Vertical Cuttings Dryers, screw conveyors, mud recovery tanks, centrifuge feed pumps, decanter centrifuges, drilling waste tanks, shaker screens, electrical controls, skids, lifting arrangements, and recommended spare parts. The final system can be configured for WBM cuttings treatment, drilling fluid recovery, closed-loop drilling, pitless drilling, onshore rigs, offshore drilling, or other project-specific waste management applications.
Related Solids Control & Drilling Waste Equipment
A High G Dryer normally works as one component in a larger solids control and drilling waste treatment process.
Related SGPE equipment includes Drilling Shale Shaker, Mud Cleaner, Desander, Desilter, Vertical Cuttings Dryer, Drilling Mud Decanter Centrifuge, VFD Decanter Centrifuge, Screw Conveyor, Mud Recovery Tank, Centrifuge Feed Pump, Shaker Screens, Drilling Waste Tank, Mud Recycling System, WBM Waste Treatment System, and Complete Drilling Waste Management System.
When the corresponding SGPE product pages are available, these product names should be used as descriptive internal-link anchor text.
Together, the equipment can form an integrated process for primary solids control, wet cuttings transfer, secondary cuttings drying, drilling fluid recovery, fine-solids separation, and final waste handling.
Request a High G Drying Shaker Price & Quotation
If you are sourcing a High G Drying Shaker for WBM cuttings drying, drilling fluid recovery, onshore drilling, or offshore waste management, send SGPE your operating conditions and project requirements for technical evaluation.
For accurate equipment selection, please provide the drilling fluid type and properties, average and peak wet cuttings rate, required drying or mud-recovery target, rig type, available installation space, power supply, hazardous-area classification, project location, and required delivery schedule. If a complete Drilling Waste Management System is required, please also confirm the screw conveyor, mud recovery tank, centrifuge feed pump, decanter centrifuge, solids handling equipment, skid, lifting arrangement, and control requirements.
Email: info@sgpe.com
Tel / WhatsApp: +86 186-1599-5239
