Description
Integral Straight Pup Joint for Oilfield Fracturing, Cementing and High Pressure Flowline Service
SGPE supplies Integral Straight Pup Joints for oilfield fracturing lines, cementing units, acidizing service lines, well testing systems, workover flowlines and high pressure surface flowline equipment. Buyers may also search for this product as an integral straight pipe, high pressure pup joint, rigid straight pipe assembly, flowline pup joint, union straight pipe, flanged straight pipe assembly or oilfield straight pipe.
An integral straight pup joint connects surface pressure equipment and helps field crews build a stable flowline at the wellsite. It transfers drilling fluid, cement slurry, fracturing fluid, acidizing fluid, well testing fluid and other oilfield service media between pump units, manifolds, treating iron, plug valves, check valves, swivel joints, wellhead equipment and pressure control systems.
Oilfield flowlines often face high pressure, vibration, repeated rig-up and harsh site conditions. For this reason, every straight pup joint must have reliable pressure-bearing performance, accurate dimensions, compatible end connections and clean sealing surfaces. SGPE provides different sizes, pressure ratings, lengths and connection types for common oilfield flowline requirements.
Common configurations include FIG union end pup joints, threaded straight pipes, welded union straight pipes and flanged straight pipe assemblies. Standard service, low temperature service and H2S sour gas service options are available according to the project condition.
Send your required size, pressure rating, FIG union type and length. SGPE will help confirm a suitable Integral Straight Pup Joint for your oilfield flowline system.
What Is an Integral Straight Pup Joint?
An Integral Straight Pup Joint is a rigid high pressure pipe with special end connections on both sides. These ends may use hammer unions, threads, flanges or other oilfield connection forms. The pup joint connects different sections of a surface flowline and keeps the layout stable during pressure pumping operations.
In oilfield service, each flowline component must match the complete system. Size, working pressure, test pressure, end connection, temperature rating, service fluid and sour gas condition all affect safety and compatibility. A mismatched pup joint may cause leakage, installation trouble, pressure loss, early wear or unsafe operation.
Before confirming a model, SGPE reviews the nominal size, pressure class, FIG union type, flange class, thread form, service condition and overall length. This helps customers receive a straight pup joint that fits the existing flowline and works correctly on site.
Oilfield Applications
Integral straight pup joints are widely used in hydraulic fracturing, cementing, acidizing, well testing, workover, well servicing and drilling support operations.
In hydraulic fracturing service, straight pup joints connect frac pumps, high pressure manifolds, plug valves, check valves, swivel joints, frac trees and treating iron. They help create a stable pressure line for fracturing fluid delivery.
During cementing jobs, the pup joint connects cementing units, cement manifolds, flowline equipment and wellhead systems. It supports cement slurry transfer during primary cementing, remedial cementing and squeeze cementing operations.
For acidizing service, straight pup joints carry acidizing fluid between pumps, manifolds and wellhead equipment. When the job involves corrosive oilfield fluids, material requirements, temperature range and connection design should be checked before production.
In well testing and workover operations, integral straight pup joints support temporary flowline layouts, pressure test lines, kill lines, discharge lines and well service equipment connections. They also help crews adjust line length during rig-up.
Typical working environments include fracturing pads, cementing job sites, acidizing service locations, workover rigs, well testing areas, wellhead pressure control systems, manifold skids and high pressure treating iron systems.
Product Advantages
SGPE integral straight pup joints combine a strong pressure-bearing structure, practical connection choices and wellsite-friendly installation. The straight pipe design helps crews build cleaner flowline layouts and reduce unnecessary connection points.
Short pup joints fit compact wellsite areas, while longer straight pipes extend pressure lines between pump units, manifolds and wellhead equipment. SGPE supplies common imperial lengths from 1 ft to 20 ft. Metric lengths such as 300 mm, 500 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 4000 mm, 5000 mm and 6000 mm are also available.
Main advantages include forged or integral construction, union, flange, thread and welded connection options, pressure ratings up to 20,000 psi, size options from 1 inch to 6 inches depending on design, standard and sour service choices, fast installation with hammer union ends, and custom dimensions for oilfield project requirements.
Common Product Types
SGPE supplies several types of high pressure straight pup joints according to connection structure, sealing method, pressure class and service condition.
Pressure Seal Type Integral Straight Pup Joint
The pressure seal type integral straight pup joint uses pressure-rated union connections for high pressure oilfield flowline service. Common union options include FIG402, FIG602, FIG1002 and FIG1502.
This type is suitable for fracturing lines, cementing lines, acidizing lines, well testing lines and pressure pumping flowline systems. Common working pressures include 4,000 psi, 6,000 psi, 10,000 psi and 15,000 psi. Available sizes usually include 1 inch, 2 inch, 3 inch and 4 inch, depending on the selected pressure rating and connection type.
Non-Pressure Seal Type Straight Pup Joint
The non-pressure seal type gives buyers another connection choice for surface flowline systems. Common end connections include FIG206, FIG602, FIG1002 and FIG1502 union ends.
This type supports working pressures from 2,000 psi to 15,000 psi according to model and size. It is often selected for oilfield pressure lines that require a suitable connection design for high pressure fluid transfer.
Conventional Integral Type Straight Pipe
The conventional integral type straight pipe offers a strong body and reliable union connection design. Common models include FIG602, FIG1002 and FIG1502 union ends. Working pressure options include 6,000 psi, 10,000 psi and 15,000 psi.
Operators often choose this type for fracturing, cementing, acidizing and well service flowlines where compact structure and reliable connection performance matter.
Integral Straight Pup Joint for H2S Service
Sour gas service requires stricter material selection, heat treatment control, inspection requirements and documentation. SGPE supplies integral straight pup joints for H2S oilfield environments according to customer specifications.
Common connection options include FIG602, FIG1002 and FIG1502 union ends. Typical pressure classes include 5,000 psi, 7,500 psi and 10,000 psi, depending on size and design. For sour service projects, customers should provide H2S condition, working pressure, temperature range, material requirement and inspection level.
Welded Union Type Straight Pipe
The welded union type straight pipe uses welded union ends for oilfield flowline connection. Common options include FIG402, FIG602, FIG1002 and FIG1502. Some projects may also require metric union connection designs.
This type supports 4,000 psi, 5,000 psi, 6,000 psi, 10,000 psi and 15,000 psi working pressure options. It suits flowline systems that need a welded structure with the convenience of union end connection.
Welded Flange Type Straight Pipe Assembly
The welded flange type straight pipe assembly, also called a flanged straight pipe assembly or spacer spool in oilfield service, uses flange connections on both ends. It suits wellhead connection points, pressure manifolds, choke and kill systems, well testing equipment and fixed high pressure flowline layouts.
Common flange sizes include 2-1/16 inch, 2-9/16 inch, 3-1/8 inch, 3-1/16 inch and 4-1/16 inch. Larger flange sizes can be reviewed for project-based wellhead and manifold equipment. Pressure options may include 3,000 psi, 5,000 psi, 10,000 psi and 15,000 psi, depending on flange size, material, design and customer requirement.
Main Technical Specifications
The following specifications support preliminary oilfield selection. Final configuration should match working pressure, test pressure, service fluid, end connection, temperature, H2S condition and project standard.
Standard Integral Straight Pup Joint Specifications
This table covers common pressure seal, non-pressure seal and conventional integral straight pup joint options for oilfield fracturing, cementing, acidizing, well testing, workover and high pressure flowline service.
| Product Type | Common End Connection | Rated Working Pressure | Common Available Sizes |
|---|---|---|---|
| Pressure Seal Type | FIG402 Union | 4,000 psi / 28 MPa | 1 in, 2 in, 3 in, 4 in |
| Pressure Seal Type | FIG602 Union | 6,000 psi / 42 MPa | 1 in, 2 in, 3 in, 4 in |
| Pressure Seal Type | FIG1002 Union | 10,000 psi / 70 MPa | 1 in, 1-1/2 in, 2 in, 3 in, 4 in |
| Pressure Seal Type | FIG1502 Union | 15,000 psi / 105 MPa | 1 in, 2 in, 3 in |
| Non-Pressure Seal Type | FIG206 Union | 2,000 psi / 14 MPa | 2 in, 3 in, 4 in |
| Non-Pressure Seal Type | FIG602 Union | 6,000 psi / 42 MPa | 2 in, 3 in, 4 in |
| Non-Pressure Seal Type | FIG1002 Union | 10,000 psi / 70 MPa | 1-1/2 in, 2 in, 3 in, 4 in |
| Non-Pressure Seal Type | FIG1502 Union | 15,000 psi / 105 MPa | 1-1/2 in, 2 in, 3 in |
| Conventional Integral Type | FIG602 Union | 6,000 psi / 42 MPa | 1-1/2 in, 2 in, 3 in |
| Conventional Integral Type | FIG1002 Union | 10,000 psi / 70 MPa | 1-1/2 in, 2 in, 3 in |
| Conventional Integral Type | FIG1502 Union | 15,000 psi / 105 MPa | 1-1/2 in, 2 in, 3 in |
H2S Service and Welded Union Straight Pipe Specifications
This table covers H2S service integral straight pup joints and welded union type straight pipes. These options are suitable for sour service requirements, special oilfield flowline layouts and project-based high pressure pipe assemblies.
| Product Type | Common End Connection | Rated Working Pressure | Common Available Sizes |
| H2S Service Integral Type | FIG602 Union | 5,000 psi / 35 MPa | 1-1/2 in, 2 in, 3 in |
| H2S Service Integral Type | FIG1002 Union | 7,500 psi / 53 MPa | 1-1/2 in, 2 in, 3 in |
| H2S Service Integral Type | FIG1502 Union | 10,000 psi / 70 MPa | 1-1/2 in, 2 in, 3 in |
| Welded Union Type | FIG402 Union | 4,000 psi / 28 MPa | 2 in, 3 in, 4 in |
| Welded Union Type | FIG602 Union | 6,000 psi / 42 MPa | 2 in, 3 in, 4 in |
| Welded Union Type | FIG1002 Union | 10,000 psi / 70 MPa | 1-1/2 in, 2 in, 3 in, 4 in |
| Welded Union Type | FIG1502 Union | 15,000 psi / 105 MPa | 1-1/2 in, 2 in, 3 in |
Union End Integral Straight Pup Joint Specifications
Union end straight pup joints help crews complete fast rig-up and dismantling during pressure pumping operations. Hammer union connections reduce installation time and allow flexible flowline layouts at drilling sites, fracturing pads, cementing locations and well testing areas.
| Nominal Size | Common End Connections | Rated Working Pressure | Common Lengths | Service |
| 2 in | FIG602, FIG1002, FIG1502 | 6,000 psi to 15,000 psi | 1 ft to 20 ft | Standard / Sour Service available |
| 3 in | FIG602, FIG1002, FIG1502, FIG2002 | 6,000 psi to 20,000 psi | 1 ft to 20 ft | Standard / Sour Service available |
| 4 in | FIG602, FIG1002, FIG1502 | 6,000 psi to 15,000 psi | 1 ft to 20 ft | Standard oilfield service |
| Custom Size | Union, Thread, Flange | Project-based | Custom length | On request |
For many pressure pumping jobs, buyers select 2 inch, 3 inch and 4 inch pup joints. These sizes cover common fracturing, cementing, acidizing, well testing and workover flowline requirements. SGPE also supports 1 inch to 5 inch or 1 inch to 6 inch options for suitable oilfield designs.
Flanged Straight Pipe Assembly Specifications
Flanged straight pipe assemblies connect oilfield equipment through bolted flange ends. They work well for wellhead pressure systems, oilfield manifolds, choke manifolds, kill manifolds, well testing equipment and fixed high pressure flowline layouts.
| Flange Size | Common Working Pressure | Common Lengths | Typical Oilfield Application |
| 2-1/16 in | 3,000 psi, 5,000 psi, 10,000 psi, 15,000 psi | 500 mm to 3000 mm | Wellhead and manifold connection |
| 2-9/16 in | 3,000 psi, 5,000 psi, 10,000 psi, 15,000 psi | 500 mm to 3000 mm | High pressure oilfield piping assembly |
| 3-1/8 in | 3,000 psi, 5,000 psi | 500 mm to 3000 mm | Pressure line connection |
| 3-1/16 in | 10,000 psi, 15,000 psi | 500 mm to 3000 mm | Well testing and pressure control equipment |
| 4-1/16 in | 3,000 psi, 5,000 psi, 10,000 psi, 15,000 psi | 500 mm to 3000 mm | Manifold and wellhead pressure system |
For a specific flanged straight pipe assembly, customers can send flange standard, pressure class, bore size, face type, material requirement and drawing. Clear flange information helps confirm compatibility with wellhead equipment, manifolds and pressure control systems.
Working Pressure and Temperature Rating
SGPE integral straight pup joints cover a wide pressure range for oilfield surface flowline service. Common working pressure options include 1,000 psi, 2,000 psi, 3,000 psi, 4,000 psi, 5,000 psi, 6,000 psi, 7,500 psi, 10,000 psi, 15,000 psi and 20,000 psi.
In metric units, common pressure classes include 7 MPa, 14 MPa, 21 MPa, 28 MPa, 35 MPa, 42 MPa, 53 MPa, 70 MPa, 105 MPa and 140 MPa. The common temperature rating covers -29°C to +121°C, often described as PU grade in oilfield flowline product information.
For low temperature service, sour gas service or special fluid conditions, the working environment should be confirmed before final design.
End Connection Options
The end connection affects installation speed, sealing performance and compatibility with other flowline equipment. SGPE offers several connection options for high pressure straight pipes.
Hammer union connections include common FIG series such as FIG206, FIG402, FIG602, FIG1002, FIG1502, FIG2002 and other project-based union types. They suit temporary flowlines, fracturing spreads, cementing lines, acidizing lines and well service rig-up operations.
Threaded connections suit equipment that requires a threaded interface. Customers should provide thread type, size and pressure class before production.
Flanged connections suit wellhead equipment, oilfield manifolds, pressure control systems and bolted pipe assemblies. Buyers should provide flange size, pressure rating, standard and face type.
Welded union connections suit flowline systems that require a welded structure with union end convenience.
Material and Manufacturing
Material selection depends on product type, pressure rating and service environment. For high pressure integral straight pup joints, forged alloy steel structures support strength, toughness and long service life in pressure pumping operations.
A high pressure straight pipe must do more than connect two flowline points. It must handle pressure, vibration, flow erosion, repeated handling and frequent rig-up. Therefore, body strength, connection accuracy, sealing surface quality and dimensional consistency are critical.
For H2S service, the engineering team confirms sour gas condition, temperature range, pressure rating and material requirement before model selection. Buyers should provide sour service requirement, material class, temperature class and working details when the pup joint needs H2S compatibility.
Connection Compatibility and Replacement Matching
Many buyers search for Integral Straight Pup Joint because they need replacement straight pipes for existing flowline systems. In this case, connection matching becomes critical. A small difference in FIG union type, end form, flange size or pipe length may affect wellsite installation.
Customers are encouraged to send photos, drawings or markings of the existing pup joint before ordering replacement parts. Clear information about FIG number, male or female end connection, nominal size, rated working pressure and overall length helps confirm the correct model faster.
For FIG union replacement pup joints, customers should confirm the union figure number, pressure rating, connection form and sealing condition. For flanged straight pipe assemblies, flange size, pressure class, face type, bore size and bolt pattern matter. For threaded straight pipes, thread type and gauge requirement help avoid connection mismatch.
For customized oilfield projects, SGPE can review customer drawings and technical specifications. Custom options may include nominal size, working pressure, total length, union type, flange size, thread type, service condition, material requirement, coating, marking, packing method and inspection documents.
How to Choose the Right Integral Straight Pup Joint
A correct selection improves field installation efficiency and supports safer operation. Buyers can start with the existing flowline connection, then confirm the pressure rating, length and service condition.
First, confirm the nominal size. Common sizes include 1 inch, 2 inch, 3 inch, 4 inch, 5 inch and 6 inch. Then confirm working pressure and test pressure. The selected straight pipe must match the highest pressure requirement of the full flowline system.
Next, confirm the end connection. For hammer union ends, provide the FIG number and connection form, such as male, female, male by female or male by male. For flange ends, provide flange size, pressure class and standard. For threaded ends, send the thread type and equipment drawing.
After that, confirm the service condition. Standard service, low temperature service and sour gas service may require different materials, heat treatment, inspection and documentation. If the pipe will work in an H2S environment, provide the sour gas requirement clearly.
Finally, confirm length and quantity. SGPE supplies common lengths from 1 ft to 20 ft and metric custom lengths. If the wellsite layout has limited space, send the installation drawing or required center-to-center length.
Quality Control and Inspection
SGPE controls key production steps to support stable product quality for oilfield service. The inspection process may include material verification, dimensional inspection, connection inspection, surface inspection, pressure-related testing and final visual checking according to order requirements.
For high pressure flowline products, dimensional accuracy matters. The end connection must match other flowline components. The pipe length must fit the wellsite layout. The sealing surfaces must remain clean and accurate. These details are checked before delivery.
Before shipment, union ends, threads, flange faces and sealing areas are protected to reduce transport damage. Customers can request material certificates, inspection reports, pressure test records, drawings, packing lists and other project documents when required.
Related Oilfield Flowline Products
Customers often purchase Integral Straight Pup Joints together with hammer unions, swivel joints, plug valves, check valves, high pressure hoses, high pressure manifolds and treating iron fittings. These products should match the same pressure class, service condition and end connection standard across the full flowline system.
For combined inquiries, customers can send the complete flowline layout, pressure rating, connection type, service fluid, temperature range and quantity. This helps SGPE check product compatibility across the full oilfield pressure pumping line.
Why Choose SGPE
SGPE understands oilfield flowline products and pressure pumping equipment requirements. The company supplies Integral Straight Pup Joint, high pressure pup joints, hammer unions, swivel joints, high pressure hoses, manifolds, drilling tools and other oilfield equipment for global customers. This product experience helps customers choose suitable high pressure straight pipe configurations for different field operations.
Both standard models and customized requirements are supported. Customers can send a simple inquiry with size, pressure, connection and length. For complex projects, drawings, working media, pressure class, temperature range and service condition help the team confirm a more accurate solution.
High pressure pup joints are usually heavy, and their connection surfaces need protection during transport. Packing methods are arranged according to product size, quantity and shipping method.
Typical Oilfield Buyers
SGPE integral straight pup joints serve oilfield service companies, drilling contractors, fracturing service companies, cementing companies, acidizing service providers, well testing companies, workover contractors, pressure pumping companies, petroleum equipment distributors and oilfield project procurement teams.
Typical purchase purposes include new flowline installation, pressure pumping equipment replacement, FIG1502 pup joint replacement, sour service flowline supply, wellhead connection modification and high pressure manifold layout adjustment.
FAQ About Integral Straight Pup Joint
1. What is an Integral Straight Pup Joint?
An Integral Straight Pup Joint is a rigid oilfield flowline pipe with special end connections on both sides. Crews use it to connect pump units, manifolds, treating iron, plug valves, check valves, swivel joints and wellhead equipment during pressure pumping operations.
Buyers also call this product an integral straight pipe, rigid straight pipe assembly, high pressure straight pipe, flowline pup joint, union straight pipe or oilfield pup joint. It is commonly used in fracturing, cementing, acidizing, well testing, workover and surface pressure control systems.
2. Where can crews use SGPE integral straight pup joints?
Crews use SGPE integral straight pup joints in hydraulic fracturing lines, cementing lines, acidizing lines, well testing flowlines, workover service lines, kill lines, pressure test lines and high pressure discharge lines.
In a fracturing spread, the pup joint connects frac pumps, high pressure manifolds and frac trees. In cementing jobs, it transfers cement slurry from the cementing unit to the wellhead. In acidizing service, it supports acid fluid delivery between pumps, manifolds and pressure control equipment.
3. What sizes are available for high pressure integral straight pup joints?
Common sizes include 1 inch, 2 inch, 3 inch, 4 inch, 5 inch and 6 inch, depending on pressure rating, end connection and service condition. Many pressure pumping jobs use 2 inch, 3 inch and 4 inch integral straight pup joints because these sizes match common flowline layouts.
For special projects, customers can send the nominal size, bore requirement, connection type, working pressure and existing flowline drawing. SGPE will check the details and recommend a suitable model.
4. What working pressure can SGPE Integral Straight Pup Joint support?
SGPE Integral Straight Pup Joint can cover common oilfield pressure ratings from 1,000 psi to 20,000 psi. Popular options include 5,000 psi, 6,000 psi, 10,000 psi, 15,000 psi and 20,000 psi integral straight pup joints.
In metric units, common pressure classes include 35 MPa, 42 MPa, 70 MPa, 105 MPa and 140 MPa. The final pressure rating should match the full flowline system, test pressure, service fluid and end connection. For example, customers can request a 15,000 psi FIG1502 pup joint or a 20,000 psi FIG2002 flowline pup joint according to project requirements.
5. What end connections can SGPE provide?
SGPE can provide hammer union, threaded, welded union and flanged end connections. Common hammer union options include FIG206, FIG402, FIG602, FIG1002, FIG1502 and FIG2002.
Customers can choose male by female, male by male, female by female or flange by flange designs. For flanged straight pipe assemblies, buyers should provide flange size, pressure class, face type and standard. Clear connection details help avoid mismatched products and speed up model selection.
6. What is the difference between a union straight pipe and a flanged straight pipe assembly?
A union straight pipe uses hammer union ends, so field crews can connect and remove it quickly during temporary rig-up. This design suits fracturing, cementing, acidizing, well testing and other pressure pumping operations that require fast assembly.
A flanged straight pipe assembly uses bolted flange ends. It suits wellhead pressure systems, oilfield manifolds, choke and kill systems, well testing equipment and fixed high pressure flowline layouts. Buyers usually choose the connection type according to the existing equipment interface and installation method.
7. Can SGPE supply FIG1502 Integral Straight Pup Joint?
Yes. SGPE can supply FIG1502 Integral Straight Pup Joint for high pressure oilfield flowline service. FIG1502 union pup joints often appear in 15,000 psi pressure pumping lines, fracturing flowlines, cementing systems and well service equipment.
When requesting a FIG1502 pup joint, customers should provide the nominal size, working pressure, overall length, connection form and service condition. Common requests include 2 inch FIG1502 male by female pup joints, 3 inch FIG1502 flowline pup joints and custom-length FIG1502 rigid straight pipe assemblies.
8. Can SGPE provide Integral Straight Pup Joint for H2S sour gas service?
SGPE can review and supply Integral Straight Pup Joint for H2S sour gas service according to customer requirements. Sour gas service often needs stricter material selection, heat treatment control, inspection requirements and documentation.
Customers should provide H2S condition, temperature range, working pressure, material requirement, inspection level and applicable project standard. With these details, SGPE can recommend a suitable sour service pup joint, H2S service flowline pup joint or sour gas integral straight pipe.
9. What length options are available for integral straight pup joints?
SGPE can provide common imperial lengths from 1 ft to 20 ft. Popular lengths include 1 ft, 2 ft, 3 ft, 4 ft, 5 ft, 6 ft, 8 ft, 10 ft, 12 ft and 20 ft. Metric options include 300 mm, 500 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 4000 mm, 5000 mm and 6000 mm.
Length selection depends on wellsite layout, flowline spacing, equipment position and installation space. For replacement pup joints, the existing overall length or center-to-center length helps SGPE confirm the right product faster.
10. What details help avoid connection mismatch?
Connection mismatch usually comes from an incorrect FIG number, wrong male or female end form, unsuitable flange size, incorrect pressure class or inaccurate pipe length. Buyers should confirm these details before ordering a high pressure flowline pup joint.
For hammer union end products, provide the FIG number and connection form. For flange end products, provide flange size, pressure class, face type and standard. For replacement pup joints, photos of the current union, flange, marking and pipe length can reduce selection errors.
11. Can SGPE make replacement integral straight pup joints for existing flowline systems?
Yes. SGPE can support replacement integral straight pup joints for existing flowline systems. Many customers need replacement straight pipes when the original pup joint wears, the pressure rating changes or the wellsite layout requires a different length.
To confirm the correct replacement pup joint, customers can send photos, drawings, nameplate information, union markings, flange details and measured length. SGPE checks the FIG union type, male or female end form, nominal size, pressure rating and service condition before recommending a matching product.
12. What information should customers send to get a quotation from SGPE?
To receive a faster quotation, customers should send the required nominal size, working pressure, end connection, length, service condition, quantity and destination port. For union end pup joints, please provide the FIG number and connection form. For flanged straight pipe assemblies, please provide flange size, pressure class, standard and face type.
If the project involves sour gas service, corrosive fluid, low temperature operation or special inspection requirements, please send those details together. SGPE will review the application and recommend a suitable Integral Straight Pup Joint for fracturing, cementing, acidizing, well testing, workover or pressure pumping flowline service.
Request a Quote from SGPE
SGPE provides Integral Straight Pup Joint, high pressure straight pipe, rigid straight pipe assembly, union straight pipe and flanged straight pipe assembly for oilfield flowline service. To receive a faster quotation, please send the required nominal size, working pressure, end connection, length, service environment, quantity and destination port.
For union end products, please provide the FIG number and connection form. For flanged straight pipe assemblies, please provide the flange size, pressure class and standard. For replacement pup joints, please send photos or drawings of the existing flowline connection if available. For sour gas service, please provide the H2S requirement, temperature range and applicable project standard.
E-Mail:
info@sgpe.com
